;************************   COMPANY INFORMATION   *************************
;*                                                                        *
;*  CREATED by Endress+Hauser GmbH+Co.                                    *
;*  PUBLISHED by Endress+Hauser Process Solutions AG, CH-4153 Reinach     *
;*                                                                        *
;********************   DEVICE and FILE INFORMATION   *********************
;*                                                                        *
;*                FILE NAME: EH3X1522.GSD                                 *
;*              DEVICE TYPE: PROFIBUS-PA                                  *
;*       DEVICE INFORMATION: Micropilot M                                 *
;*    PROFILE COMPATIBILITY: PROFILE 3.0                                  *
;*      DPV1 IMPLEMENTATION: MSAC1_Read/Write                             *
;*                           MSAC2_Read/Write                             *
;*        IDENTIFIER FORMAT: Extended                                     *
;*                                                                        *
;**********************   GSD REVISION INFORMATION   **********************
;* $Revision: 1.0 $                                                       *
;* $Date: Thu Jul 13 10:42:06 2000 $                                      *
;*                                                                        *
;*    DATE    | NAME | VERSION |                  COMMENT                 *
;* ---------------------------------------------------------------------- *
;* 13.07.2000 | Kil  |   1.0   | initial revision                         *
;**************************************************************************

;****************************  General DP Keywords  ***********************
#Profibus_DP
GSD_Revision        = 2
Vendor_Name         = "Endress + Hauser"
Model_Name          = "Micropilot M E+H"
Revision            = "Profile 3.0"
Ident_Number        = 0x1522
Protocol_Ident      = 0
Station_Type        = 0
FMS_supp            = 0
Hardware_Release    = "All"
Software_Release    = "All"

31.25_supp          = 1
45.45_supp          = 1
93.75_supp          = 1
MaxTsdr_31.25       = 100
MaxTsdr_45.45       = 250
MaxTsdr_93.75       = 1000
Implementation_Type = "SPC4/ITEC"
Bitmap_Device       = "EH1522_N"
Bitmap_Diag         = "EH1522_D"
Bitmap_SF           = "EH1522_S"

;*********  Additional Keywords For Different Physical Interfaces  ********
;*****************  DP Master (Class 1) Related Keywords  *****************
;*********  Additional Master Related Keywords For DP Extensions  *********

;********************  Basic DP-Slave Related Keywords  *******************
Freeze_Mode_supp    = 1
Sync_Mode_supp      = 0
Auto_Baud_supp      = 0
Set_Slave_Add_supp  = 1
Min_Slave_Intervall = 250
Modular_Station     = 1
Max_Module          = 3
Max_Input_Len       = 10
Max_Output_Len      = 5
Max_Data_Len        = 15
Max_Diag_Data_Len   = 20

Unit_Diag_Bit(16)   = "Error appears"
Unit_Diag_Bit(17)   = "Error disappears"
Unit_Diag_Bit(24)   = "Hardware failure electronics"
Unit_Diag_Bit(25)   = "Hardware failure mechanics"
Unit_Diag_Bit(26)   = "Motor temperature too high"
Unit_Diag_Bit(27)   = "Electronic temperature too high"
Unit_Diag_Bit(28)   = "Memory error"
Unit_Diag_Bit(29)   = "Measurement failure"
Unit_Diag_Bit(30)   = "Device not initialized"
Unit_Diag_Bit(31)   = "Device initialization failed"
Unit_Diag_Bit(32)   = "Zero point error"
Unit_Diag_Bit(33)   = "Power supply failed"
Unit_Diag_Bit(34)   = "Configuration invalid"
Unit_Diag_Bit(35)   = "Restart"
Unit_Diag_Bit(36)   = "Coldstart"
Unit_Diag_Bit(37)   = "Maintenance required"
Unit_Diag_Bit(38)   = "Characteristics invalid"
Unit_Diag_Bit(39)   = "Ident_Number violation"
Unit_Diag_Bit(55)   = "Extension Available"

Unit_Diag_Bit(57)   = "A111: RAM failure"
Unit_Diag_Bit(58)   = "A113: ROM failure"
Unit_Diag_Bit(59)   = "A114: EEPROM failure"
Unit_Diag_Bit(60)   = "A164: MEAS CPU: EEPROM failure"
Unit_Diag_Bit(61)   = "A102: EEPROM seg C chksum error"
Unit_Diag_Bit(62)   = "A121: EEPROM seg B chksum error"
Unit_Diag_Bit(63)   = "A171: M-CPU: EE seg B cs error"
Unit_Diag_Bit(64)   = "A110: EEPROM seg A chksum error"
Unit_Diag_Bit(65)   = "A160: M-CPU: EE seg A cs error"
Unit_Diag_Bit(66)   = "A155: M-CPU: EEPROM failure"
Unit_Diag_Bit(67)   = "A231: Module failure"
Unit_Diag_Bit(68)   = "A115: Hardware failure"
Unit_Diag_Bit(69)   = "A272: Amplifier failure"
Unit_Diag_Bit(70)   = "A106: Download active"
Unit_Diag_Bit(71)   = "A116: Download error"
Unit_Diag_Bit(72)   = "A641: No echo"
Unit_Diag_Bit(73)   = "A671: Lin. tab. not available"
Unit_Diag_Bit(74)   = "A651: Echo in safety distance"
Unit_Diag_Bit(75)   = "A270: Custody switch error"
Unit_Diag_Bit(76)   = "W641: No echo"
Unit_Diag_Bit(77)   = "W651: Echo in safety distance"
Unit_Diag_Bit(78)   = "W271: phase/amplitude error"
Unit_Diag_Bit(79)   = "W273: inconsistant index mapping"
Unit_Diag_Bit(80)   = "W274: inconsistant microfactor"
Unit_Diag_Bit(81)   = "W275: DC offset to high"
Unit_Diag_Bit(82)   = "W681: Current out of range"
Unit_Diag_Bit(83)   = "W511: No factory mapping avail"
Unit_Diag_Bit(84)   = "W512: Mapping is carried out"
Unit_Diag_Bit(85)   = "W611: Lin. curve 2 points error"
Unit_Diag_Bit(86)   = "W601: Lin. curve rising error"
Unit_Diag_Bit(87)   = "W621: Simulation mode"
Unit_Diag_Bit(88)   = "W103: Initialization active"
Unit_Diag_Bit(89)   = "W153: M-CPU: iit active"

Module    = "Main Process Value"   0x42,0x84,0x08,0x05
EndModule

Module    = "2nd Cyclic Value"   0x42,0x84,0x08,0x05
EndModule

Module    = "Display Value"   0x82,0x84,0x08,0x05
EndModule

Module    = "Free Place"   0x00
EndModule

Slave_Family        = 12

;**************  Additional Keywords For Module Assignment  ***************
;***************  Slave Related Keywords For DP Extensions  ***************
;*************  Slave Related Keywords For ProfiSafe Profile  *************