;=============================================================================
;GSD File for Profibus DP (EN 50170)
;=============================================================================
;
; FILENAME   : Trckff9f.gsd
;-----------------------------------------------------------------------------
; VENDOR     : Hans TURCK GmbH & Co. KG
;-----------------------------------------------------------------------------
; AUTHOR     : - Praske -
;              
;              
;-----------------------------------------------------------------------------
; DATE       : 10.01.2002
;-----------------------------------------------------------------------------
; VERSION    : 1.2.0
;-----------------------------------------------------------------------------
; Revision   : 1.2.0 DI40Ex added
;                    TF20Ex P changed to DF20Ex P
;                    TF20Ex F changed to DF20Ex F
;=============================================================================
#Profibus_DP
GSD_Revision = 3
Vendor_Name = "Hans Turck GmbH & Co. KG"
Model_Name = "Excom TURCK"
Revision = "1.2.0"
Info_Text = "Process I/O System"
OrderNumber = "GDP1,5   Id:6884008"
Ident_Number = 0xff9f

Protocol_Ident = 0              ; Profibus-DP
Station_Type = 0                ; DP-slave
Hardware_Release = "12233301Z"
Software_Release = "1.4.0"      ; of the slave
FMS_supp = 0                    ; DP

9.6_supp = 1
19.2_supp = 1
45.45_supp = 1
93.75_supp = 1
187.5_supp = 1
500_supp = 1
1.5M_supp = 1
3M_supp = 0
6M_supp = 0
12M_supp = 0

MaxTsdr_9.6 = 60
MaxTsdr_19.2 = 60
MaxTsdr_45.45 = 250
MaxTsdr_93.75 = 60
MaxTsdr_187.5 = 60
MaxTsdr_500 = 100
MaxTsdr_1.5M = 150
MaxTsdr_3M = 250
MaxTsdr_6M = 450
MaxTsdr_12M = 800

Redundancy = 0
Repeater_Ctrl_Sig = 0
24V_Pins = 0

;=============================================================================
; Slave specific Data
;=============================================================================
Modular_Station     = 1
Freeze_Mode_supp = 1
Sync_Mode_supp = 1
Auto_Baud_supp = 1
Fail_Safe = 1
Modul_Offset = 0
Set_Slave_Add_supp = 0
Min_Slave_Intervall = 1         ; 100µs
ABB_HCIR_supp = 1               ; supports hot configuration in run
ABB_HCIR_Offset = 6             ; position of parameter byte in User_Prm


;=============================================================================
; Bitmap, Implementation
;=============================================================================
Implementation_Type = "SPC3"
Bitmap_Device = "EXCOM--n"
Bitmap_Diag = "EXCOM--d"
Bitmap_SF = "EXCOM--s"
Slave_Family=3 ;I/O

;=============================================================================
; Limitations
;=============================================================================
Max_Module          = 17        ; slot 0..16
Max_Input_Len       = 216
Max_Output_Len      = 216
Max_Data_Len        = 216
Max_User_Prm_Data_Len = 87
Max_Diag_Data_Len   = 80

;=============================================================================
; DPV1 specific data
;=============================================================================
DPV1_Slave = 1
WD_Base_1ms_supp = 0
Check_Cfg_Mode = 1
C1_Read_Write_supp = 1
C1_Max_Data_Len = 132
C1_Response_Timeout = 50
C1_Read_Write_required = 0
C2_Read_Write_supp = 1
C2_Max_Data_Len = 132
C2_Read_Write_required = 0
C2_Max_Count_Channels = 1
C2_Response_Timeout = 50
Max_Initiate_PDU_Length = 132
DPV1_Data_Types = 0

;=============================================================================
; User Parameter preset
;=============================================================================
Ext_User_Prm_Data_Const(0) = 0x00,0x00,0x00 ; DPV1 parameters
;DPV1 status1 = 0x00 =>
;       Bit2 = 0 WD_Base=10ms (1ms=1)
;       Bit7 = 1 DPV1 Enable (Disable=0)
;DPV1 status2 = 0x00 =>
;       Bit0 = 0 ChkCfg nach EN50170(User specific=1)
;DPV1 status3 = 0x00 =>
;       alarm not implemented

;=============================================================================
; Parameter text definition
;=============================================================================
;  1..10: for general use (slot 0 and I/O modules
; 11..50: used for slot 0 only
; 51... : used for I/O modules only

;General used parameter text--------------------------------------------------

PrmText = 1
Text(0) = "on"
Text(1) = "off"
EndPrmText

PrmText = 2
Text(0) = "off"
Text(1) = "on"
EndPrmText

PrmText = 3
Text(0) = "on"
Text(3) = "off"
EndPrmText

;-----------------------------------------------------------------------------

;slot 0 parameter text -------------------------------------------------------
PrmText = 11
;Text(0) = "mode 1"
Text(1) = "mode 2"
;Text(2) = "mode 3"
EndPrmText

PrmText = 12
Text(0) = "50Hz"
Text(1) = "60Hz"
EndPrmText

PrmText = 13
Text(0) = "status MSB"
Text(1) = "status LSB"
Text(2) = "no status"
EndPrmText

PrmText = 14
Text(0) = "MT5 (4 I/O modules)"
Text(1) = "MT9 (8 I/O modules)"
Text(2) = "MT18 (16 I/O modules)"
EndPrmText

PrmText = 15
Text(0) = "base x 1"
Text(1) = "base x 16"
EndPrmText

PrmText = 16
Text(0) = "off"
Text(1) = "mode 1"
;Text(2) = "mode 2"
Text(3) = "mode 3"
EndPrmText

PrmText = 17
Text(0) = "off"
Text(1) = "mode 1"
Text(2) = "mode 2"
Text(3) = "mode 3"
EndPrmText

PrmText = 18
Text(0) = "single"
Text(1) = "redundant"
EndPrmText

PrmText = 22
Text(0) = "select 0"
Text(1) = "select 1"
EndPrmText

PrmText = 23
Text(0) = "select 0"
Text(1) = "select 1"
Text(2) = "select 2"
Text(3) = "select 3"
EndPrmText

PrmText = 26
Text(0) = "disable"
Text(1) = "enable"
EndPrmText

;-----------------------------------------------------------------------------

;I/O module partameter text --------------------------------------------------

PrmText = 71
Text(0) = "min value"
Text(1) = "max value"
Text(2) = "last valid value"
EndPrmText

PrmText = 79
Text(0) = "input"
Text(1) = "output"
EndPrmText

PrmText = 87
Text(0) = "normal"
Text(1) = "inverted"
EndPrmText

PrmText = 95
Text(0) = "off"
Text(1) = "10ms"
Text(2) = "20ms"
Text(3) = "50ms"
EndPrmText

PrmText = 103
Text(0) = "off"
Text(1) = "0.1s"
Text(2) = "2.6s"
Text(3) = "29.2s"
EndPrmText

PrmText = 107
Text(0) = "off"
Text(1) = "1.2s"
Text(2) = "11s"
Text(3) = "25s"
EndPrmText

PrmText = 111
Text(0) = "0..20mA"
Text(1) = "4..20mA"
EndPrmText

PrmText = 112
Text(0) = "0..10V"
Text(1) = "2..10V"
EndPrmText

PrmText = 119
Text(0) = "off / 0..20mA"
Text(1) = "off / 4..20mA"
Text(2) = "on / 4..20mA"
EndPrmText

PrmText = 123
Text(0) = "primary"
Text(1) = "secondary 1"
Text(2) = "secondary 2"
Text(3) = "secondary 3"
Text(4) = "secondary 4"
EndPrmText

PrmText = 124
Text(0) = "ch. 1"
Text(1) = "ch. 2"
Text(2) = "ch. 3"
Text(3) = "ch. 4"
EndPrmText

PrmText = 145
Text(0) = "base + 0 Ohm"
Text(1) = "base + 0.5 Ohm"
Text(2) = "base + 1.0 Ohm"
Text(3) = "base + 1.5 Ohm"
Text(4) = "base + 2.0 Ohm"
Text(5) = "base + 2.5 Ohm"
Text(6) = "base + 3.0 Ohm"
Text(7) = "base + 3.5 Ohm"
Text(8) = "base + 4.0 Ohm"
Text(9) = "base + 4.5 Ohm"
Text(10) = "base + 5.0 Ohm"
Text(11) = "base + 5.5 Ohm"
Text(12) = "base + 6.0 Ohm"
Text(13) = "base + 6.5 Ohm"
Text(14) = "base + 7.0 Ohm"
Text(15) = "base + 7.5 Ohm"
EndPrmText

PrmText = 157
Text(0) = "0 C"
Text(1) = "10 C"
Text(2) = "20 C"
Text(3) = "30 C"
Text(4) = "40 C"
Text(5) = "50 C"
Text(6) = "60 C"
Text(7) = "70 C"
EndPrmText

PrmText = 161
Text(0) = "2w / 0 Ohm base"
Text(1) = "2w / 8 Ohm base"
Text(2) = "3w"
Text(3) = "4w"
EndPrmText

PrmText = 162
Text(0) = "PT100 (IEC 751)"
Text(1) = "PT200 (IEC 751)"
Text(2) = "PT400 (IEC 751)"
Text(3) = "PT1000 (IEC 751)"
Text(4) = "PT100 (JIS)"
Text(5) = "PT1000 (JIS)"
Text(6) = "PT100 (SAMA)"
Text(7) = "PT1000 (SAMA)"
Text(8) = "NI100"
;Text(9) = "reserved"
;Text(10) = "reserved"
Text(11) = "CU100"
;Text(12) = "reserved"
Text(13) = "0..30 Ohm [mOhm]"
Text(14) = "0..300 Ohm [10mOhm]"
Text(15) = "0..3kOhm [100mOhm]"
EndPrmText

PrmText = 163
Text(0) = "Type B"
Text(1) = "Type E"
Text(2) = "Type J"
Text(3) = "Type K"
Text(4) = "Type L"
Text(5) = "Type N"
Text(6) = "Type R"
Text(7) = "Type S"
Text(8) = "Type T"
Text(9) = "Type U"
Text(10) = "Type C"
Text(11) = "Type D"
;Text(12) = "reserved"
Text(13) = "-75..+75mV [5uV]"
;Text(14) = "reserved"
Text(15) = "-1.2..+1.2V [100uV]"
EndPrmText

PrmText = 164
Text(0) = "no"
Text(1) = "internal"
Text(2) = "PT100 on terminal"
Text(3) = "external (fixed)"
EndPrmText

PrmText = 187
Text(0) = "host controlled"
Text(1) = "field controlled"
EndPrmText

PrmText = 189
Text(0) = "off"
Text(1) = "50ms"
EndPrmText

PrmText = 191
Text(0) = "count up (f < 4kHz)"
Text(1) = "host controlled (f < 4kHz)"
Text(2) = "field controlled (f < 4kHz)"
Text(3) = "field contr.(auto, f < 1.25kHz)"
EndPrmText

PrmText = 205
Text(0) = "0..100Hz"
Text(1) = "0..1kHz"
Text(2) = "0..4kHz"
;Text(3) = "reserved"
EndPrmText

PrmText = 209
Text(0) = "rising"
Text(1) = "rising + falling"
EndPrmText

PrmText = 211
Text(0) = "< 300ms (0.1% resolution)"
Text(1) = "< 50ms (1% resolution)"
EndPrmText

PrmText = 213
Text(0) = "off"
Text(1) = "4 values"
Text(2) = "8 values"
Text(3) = "16 values"
EndPrmText

PrmText = 215
Text(0) = "active"
Text(1) = "inactive"
EndPrmText

PrmText = 223
Text(0) = "min value"
Text(1) = "max value"
Text(2) = "last valid value"
Text(3) = "Channel deactivated"
EndPrmText

;=============================================================================
; Parameter name definition
;=============================================================================
; For ExtUserPrmData:
;  1..10:   for general use (both slot 0 and I/O modules).
; 11..50:   used for slot 0 only
; 51... :   used for I/O modules only

;General used parameter names ------------------------------------------------

;-----------------------------------------------------------------------------

ExtUserPrmData = 1 "value"
Unsigned8 0 0-255
EndExtUserPrmData

;slot 0 parameter names ------------------------------------------------------

ExtUserPrmData = 11 "prm. mode"
BitArea(0-1) 1 1-1
Prm_Text_Ref = 11       ; mode 1, 2, 3
EndExtUserPrmData

ExtUserPrmData = 12 "grid frequency"
Bit(2) 0 0-1
Prm_Text_Ref = 12       ; 50Hz / 60Hz
EndExtUserPrmData

ExtUserPrmData = 13 "analog data format"
BitArea(3-4) 0 0-2
Prm_Text_Ref = 13       ; MSB / LSB / none
EndExtUserPrmData

ExtUserPrmData = 14 "backplane"
BitArea(5-6) 2 0-2
Prm_Text_Ref = 14       ; 4 / 8 / 16 I/O modules
EndExtUserPrmData

ExtUserPrmData = 15 "HCIR WCBC factor"
Bit(6) 0 0-1
Prm_Text_Ref = 15       ; x 1 / x 16
EndExtUserPrmData

ExtUserPrmData = 16 "redundancy mode"
BitArea(0-1) 0 0,1,3
Prm_Text_Ref = 16       ; off / mode 1 / ...
EndExtUserPrmData

ExtUserPrmData = 17 "redundancy mode"
BitArea(0-1) 0 0-3
Prm_Text_Ref = 17       ; off / mode 1 / ...
EndExtUserPrmData

ExtUserPrmData = 18 "power supply"
Bit(3) 0 0-1
Prm_Text_Ref = 18       ; single / redundant
EndExtUserPrmData

ExtUserPrmData = 19 "cyclic data"
BitArea(4-5) 0 0-3
Prm_Text_Ref = 23       ; select 0 / slect 1 / ...
EndExtUserPrmData

ExtUserPrmData = 20 "HCIR WCBC base (x 100ms)"
BitArea(0-5) 5 0-63
EndExtUserPrmData

ExtUserPrmData = 21 "HCIR active"
Bit(7) 0 0-1
Prm_Text_Ref = 2        ; on / off
EndExtUserPrmData

ExtUserPrmData = 26 "address offset"
Bit(7) 0 0-1
Prm_Text_Ref = 26       ; disable / enable
EndExtUserPrmData

ExtUserPrmData = 25 "address offset value"
BitArea(0-6) 0 0-124
EndExtUserPrmData

ExtUserPrmData = 22 "SF1"
Bit(7) 0 0-1
Prm_Text_Ref = 22       ; select 0 / select 1
EndExtUserPrmData

ExtUserPrmData = 23 "SF2"
BitArea(6-7) 0 0-3
Prm_Text_Ref = 23       ; select 0 / select 1 / ...
EndExtUserPrmData

ExtUserPrmData = 24 "SF3"
Bit(2) 0 0-1
Prm_Text_Ref = 22       ; select 0 / select 1
EndExtUserPrmData

;-----------------------------------------------------------------------------

;I/O module parameter names --------------------------------------------------

ExtUserPrmData = 51 "ch. 1,2: short detect"
Bit(7) 0 0-1
Prm_Text_Ref = 1        ; on / off
EndExtUserPrmData

ExtUserPrmData = 52 "ch. 3,4: short detect"
Bit(7) 0 0-1
Prm_Text_Ref = 1        ; on / off
EndExtUserPrmData

ExtUserPrmData = 53 "ch. 5,6: short detect"
Bit(7) 0 0-1
Prm_Text_Ref = 1        ; on / off
EndExtUserPrmData

ExtUserPrmData = 54 "ch. 7,8: short detect"
Bit(7) 0 0-1
Prm_Text_Ref = 1        ; on / off
EndExtUserPrmData

ExtUserPrmData = 55 "ch. 1: short detect"
Bit(7) 0 0-1
Prm_Text_Ref = 1        ; on / off
EndExtUserPrmData

ExtUserPrmData = 56 "ch. 2: short detect"
Bit(7) 0 0-1
Prm_Text_Ref = 1        ; on / off
EndExtUserPrmData

ExtUserPrmData = 57 "ch. 3: short detect"
Bit(7) 0 0-1
Prm_Text_Ref = 1        ; on / off
EndExtUserPrmData

ExtUserPrmData = 58 "ch. 4: short detect"
Bit(7) 0 0-1
Prm_Text_Ref = 1        ; on / off
EndExtUserPrmData


ExtUserPrmData = 59 "ch. 1,2: open line detect"
Bit(6) 0 0-1
Prm_Text_Ref = 1        ; on / off
EndExtUserPrmData

ExtUserPrmData = 60 "ch. 3,4: open line detect"
Bit(6) 0 0-1
Prm_Text_Ref = 1        ; on / off
EndExtUserPrmData

ExtUserPrmData = 61 "ch. 5,6: open line detect"
Bit(6) 0 0-1
Prm_Text_Ref = 1        ; on / off
EndExtUserPrmData

ExtUserPrmData = 62 "ch. 7,8: open line detect"
Bit(6) 0 0-1
Prm_Text_Ref = 1        ; on / off
EndExtUserPrmData

ExtUserPrmData = 63 "ch. 1: open line detect"
Bit(6) 0 0-1
Prm_Text_Ref = 1        ; on / off
EndExtUserPrmData

ExtUserPrmData = 64 "ch. 2: open line detect"
Bit(6) 0 0-1
Prm_Text_Ref = 1        ; on / off
EndExtUserPrmData

ExtUserPrmData = 65 "ch. 3: open line detect"
Bit(6) 0 0-1
Prm_Text_Ref = 1        ; on / off
EndExtUserPrmData

ExtUserPrmData = 66 "ch. 4: open line detect"
Bit(6) 0 0-1
Prm_Text_Ref = 1        ; on / off
EndExtUserPrmData


ExtUserPrmData = 67 "ch. 1: line monitoring"
BitArea(6-7) 0 0,3
Prm_Text_Ref = 3        ; on / off
EndExtUserPrmData

ExtUserPrmData = 68 "ch. 2: line monitoring"
BitArea(6-7) 0 0,3
Prm_Text_Ref = 3        ; on / off
EndExtUserPrmData

ExtUserPrmData = 69 "ch. 3: line monitoring"
BitArea(6-7) 0 0,3
Prm_Text_Ref = 3        ; on / off
EndExtUserPrmData

ExtUserPrmData = 70 "ch. 4: line monitoring"
BitArea(6-7) 0 0,3
Prm_Text_Ref = 3        ; on / off
EndExtUserPrmData


ExtUserPrmData = 71 "ch. 1,2: failsafe mode"
BitArea(4-5) 0 0-2
Prm_Text_Ref = 71       ; min / max / lgv
EndExtUserPrmData

ExtUserPrmData = 72 "ch. 3,4: failsafe mode"
BitArea(4-5) 0 0-2
Prm_Text_Ref = 71       ; min / max / lgv
EndExtUserPrmData

ExtUserPrmData = 73 "ch. 5,6: failsafe mode"
BitArea(4-5) 0 0-2
Prm_Text_Ref = 71       ; min / max / lgv
EndExtUserPrmData

ExtUserPrmData = 74 "ch. 7,8: failsafe mode"
BitArea(4-5) 0 0-2
Prm_Text_Ref = 71       ; min / max / lgv
EndExtUserPrmData

ExtUserPrmData = 75 "ch. 1: failsafe mode"
BitArea(4-5) 0 0-2
Prm_Text_Ref = 71       ; min / max / lgv
EndExtUserPrmData

ExtUserPrmData = 76 "ch. 2: failsafe mode"
BitArea(4-5) 0 0-2
Prm_Text_Ref = 71       ; min / max / lgv
EndExtUserPrmData

ExtUserPrmData = 77 "ch. 3: failsafe mode"
BitArea(4-5) 0 0-2
Prm_Text_Ref = 71       ; min / max / lgv
EndExtUserPrmData

ExtUserPrmData = 78 "ch. 4: failsafe mode"
BitArea(4-5) 0 0-2
Prm_Text_Ref = 71       ; min / max / lgv
EndExtUserPrmData

ExtUserPrmData = 79 "ch. 1,2: direction"
Bit(3) 0 0-1
Prm_Text_Ref = 79       ; in / out
EndExtUserPrmdata

ExtUserPrmData = 80 "ch. 3,4: direction"
Bit(3) 0 0-1
Prm_Text_Ref = 79       ; in / out
EndExtUserPrmdata

ExtUserPrmData = 81 "ch. 5,6: direction"
Bit(3) 0 0-1
Prm_Text_Ref = 79       ; in / out
EndExtUserPrmdata

ExtUserPrmData = 82 "ch. 7,8: direction"
Bit(3) 0 0-1
Prm_Text_Ref = 79       ; in / out
EndExtUserPrmdata


ExtUserPrmData = 87 "ch. 1,2: polarity"
Bit(2) 0 0-1
Prm_Text_Ref = 87       ; norm / inv
EndExtUserPrmdata

ExtUserPrmData = 88 "ch. 3,4: polarity"
Bit(2) 0 0-1
Prm_Text_Ref = 87       ; norm / inv
EndExtUserPrmdata

ExtUserPrmData = 89 "ch. 5,6: polarity"
Bit(2) 0 0-1
Prm_Text_Ref = 87       ; norm / inv
EndExtUserPrmdata

ExtUserPrmData = 90 "ch. 7,8: polarity"
Bit(2) 0 0-1
Prm_Text_Ref = 87       ; norm / inv
EndExtUserPrmdata

ExtUserPrmData = 91 "ch. 1: polarity"
Bit(2) 0 0-1
Prm_Text_Ref = 87       ; norm / inv
EndExtUserPrmdata

ExtUserPrmData = 92 "ch. 2: polarity"
Bit(2) 0 0-1
Prm_Text_Ref = 87       ; norm / inv
EndExtUserPrmdata

ExtUserPrmData = 93 "ch. 3: polarity"
Bit(2) 0 0-1 ; Default = 0, Min = 0, Max = 1
Prm_Text_Ref = 87       ; norm / inv
EndExtUserPrmdata

ExtUserPrmData = 94 "ch. 4: polarity"
Bit(2) 0 0-1
Prm_Text_Ref = 87       ; norm / inv
EndExtUserPrmdata


ExtUserPrmData = 95 "ch. 1,2: damping"
BitArea(0-1) 0 0-3
Prm_Text_Ref = 95       ; off / x sec / y sec
EndExtUserPrmdata

ExtUserPrmData = 96 "ch. 3,4: damping"
BitArea(0-1) 0 0-3
Prm_Text_Ref = 95       ; off / x sec / y sec
EndExtUserPrmdata

ExtUserPrmData = 97 "ch. 5,6: damping"
BitArea(0-1) 0 0-3
Prm_Text_Ref = 95       ; off / x sec / y sec
EndExtUserPrmdata

ExtUserPrmData = 98 "ch. 7,8: damping"
BitArea(0-1) 0 0-3
Prm_Text_Ref = 95       ; off / x sec / y sec
EndExtUserPrmdata

ExtUserPrmData = 99 "ch. 1: damping"
BitArea(0-1) 0 0-3
Prm_Text_Ref = 95       ; off / x sec / y sec
EndExtUserPrmdata

ExtUserPrmData = 100 "ch. 2: damping"
BitArea(0-1) 0 0-3
Prm_Text_Ref = 95       ; off / x sec / y sec
EndExtUserPrmdata

ExtUserPrmData = 101 "ch. 3: damping"
BitArea(0-1) 0 0-3
Prm_Text_Ref = 95       ; off / x sec / y sec
EndExtUserPrmdata

ExtUserPrmData = 102 "ch. 4: damping"
BitArea(0-1) 0 0-3
Prm_Text_Ref = 95       ; off / x sec / y sec
EndExtUserPrmdata


ExtUserPrmData = 103 "ch. 1: filter (PT1)"
BitArea(0-1) 0 0-3
Prm_Text_Ref = 103      ; off / 0.1s / 2.6s / 29.2s
EndExtUserPrmdata

ExtUserPrmData = 104 "ch. 2: filter (PT1)"
BitArea(0-1) 0 0-3
Prm_Text_Ref = 103      ; off / 0.1s / 2.6s / 29.2s
EndExtUserPrmdata

ExtUserPrmData = 105 "ch. 3: filter (PT1)"
BitArea(0-1) 0 0-3
Prm_Text_Ref = 103      ; off / 0.1s / 2.6s / 29.2s
EndExtUserPrmdata

ExtUserPrmData = 106 "ch. 4: filter (PT1)"
BitArea(0-1) 0 0-3
Prm_Text_Ref = 103      ; off / 0.1s / 2.6s / 29.2s
EndExtUserPrmdata


ExtUserPrmData = 107 "filter (PT1)"
BitArea(4-5) 0 0-3
Prm_Text_Ref = 107      ; off / 1s / 9s / 30s
EndExtUserPrmdata


ExtUserPrmData = 111 "ch. 1: range"
Bit(2) 1 0-1
Prm_Text_Ref = 111      ; 0..20 / 4..20mA
EndExtUserPrmdata

ExtUserPrmData = 112 "ch. 2: range"
Bit(2) 1 0-1
Prm_Text_Ref = 111      ; 0..20 / 4..20mA
EndExtUserPrmdata

ExtUserPrmData = 113 "ch. 3: range"
Bit(2) 1 0-1
Prm_Text_Ref = 111      ; 0..20 / 4..20mA
EndExtUserPrmdata

ExtUserPrmData = 114 "ch. 4: range"
Bit(2) 1 0-1
Prm_Text_Ref = 111      ; 0..20 / 4..20mA
EndExtUserPrmdata


ExtUserPrmData = 115 "ch. 1: range"
Bit(2) 1 0-1
Prm_Text_Ref = 112      ; 0..10V / 2..10V
EndExtUserPrmdata

ExtUserPrmData = 116 "ch. 2: range"
Bit(2) 1 0-1
Prm_Text_Ref = 112      ; 0..10V / 2..10V
EndExtUserPrmdata

ExtUserPrmData = 117 "ch. 3: range"
Bit(2) 1 0-1
Prm_Text_Ref = 112      ; 0..10V / 2..10V 
EndExtUserPrmdata

ExtUserPrmData = 118 "ch. 4: range"
Bit(2) 1 0-1
Prm_Text_Ref = 112      ; 0..10V / 2..10V
EndExtUserPrmdata


ExtUserPrmData = 119 "ch. 1: HART status / range"
BitArea(2-3) 2 0-2
Prm_Text_Ref = 119      ; off, 0..20mA / off, 4..20mA / ...
EndExtUserPrmdata

ExtUserPrmData = 120 "ch. 2: HART status / range"
BitArea(2-3) 2 0-2
Prm_Text_Ref = 119      ; off, 0..20mA / off, 4..20mA / ...
EndExtUserPrmdata

ExtUserPrmData = 121 "ch. 3: HART status / range"
BitArea(2-3) 2 0-2
Prm_Text_Ref = 119      ; off, 0..20mA / off, 4..20mA / ...
EndExtUserPrmdata

ExtUserPrmData = 122 "ch. 4: HART status / range"
BitArea(2-3) 2 0-2
Prm_Text_Ref = 119      ; off, 0..20mA / off, 4..20mA / ...
EndExtUserPrmdata


ExtUserPrmData = 123 "HART variable"
BitArea(2-4) 1 0-4
Prm_Text_Ref = 123      ; prim / sec 1 / sec 2 / ...
EndExtUserPrmdata


ExtUserPrmData = 124 "HART var. of channel"
BitArea(0-1) 0 0-3
Prm_Text_Ref = 124      ; ch. 1 / ch. 2 / ...
EndExtUserPrmdata


ExtUserPrmData = 125 "ch. 1: SV4"
Bit(3) 0 0-1
Prm_Text_Ref = 2        ; on / off
EndExtUserPrmdata

ExtUserPrmData = 126 "ch. 1: SV3"
Bit(2) 0 0-1
Prm_Text_Ref = 2        ; on / off
EndExtUserPrmdata

ExtUserPrmData = 127 "ch. 1: SV2"
Bit(1) 0 0-1
Prm_Text_Ref = 2        ; on / off
EndExtUserPrmdata

ExtUserPrmData = 128 "ch. 1: SV1"
Bit(0) 1 0-1
Prm_Text_Ref = 2        ; on / off
EndExtUserPrmdata

ExtUserPrmData = 129 "ch. 2: SV4"
Bit(3) 0 0-1
Prm_Text_Ref = 2        ; on / off
EndExtUserPrmdata

ExtUserPrmData = 130 "ch. 2: SV3"
Bit(2) 0 0-1
Prm_Text_Ref = 2        ; on / off
EndExtUserPrmdata

ExtUserPrmData = 131 "ch. 2: SV2"
Bit(3) 0 0-1
Prm_Text_Ref = 2        ; on / off
EndExtUserPrmdata

ExtUserPrmData = 132 "ch. 2: SV1"
Bit(2) 1 0-1
Prm_Text_Ref = 2        ; on / off
EndExtUserPrmdata

ExtUserPrmData = 133 "ch. 3: SV4"
Bit(3) 0 0-1
Prm_Text_Ref = 2        ; on / off
EndExtUserPrmdata

ExtUserPrmData = 134 "ch. 3: SV3"
Bit(2) 0 0-1
Prm_Text_Ref = 2        ; on / off
EndExtUserPrmdata

ExtUserPrmData = 135 "ch. 3: SV2"
Bit(5) 0 0-1
Prm_Text_Ref = 2        ; on / off
EndExtUserPrmdata

ExtUserPrmData = 136 "ch. 3: SV1"
Bit(4) 1 0-1
Prm_Text_Ref = 2        ; on / off
EndExtUserPrmdata

ExtUserPrmData = 137 "ch. 4: SV4"
Bit(3) 0 0-1
Prm_Text_Ref = 2        ; on / off
EndExtUserPrmdata

ExtUserPrmData = 138 "ch. 4: SV3"
Bit(2) 0 0-1
Prm_Text_Ref = 2        ; on / off
EndExtUserPrmdata

ExtUserPrmData = 139 "ch. 4: SV2"
Bit(7) 0 0-1
Prm_Text_Ref = 2        ; on / off
EndExtUserPrmdata

ExtUserPrmData = 140 "ch. 4: SV1"
Bit(6) 1 0-1
Prm_Text_Ref = 2        ; on / off
EndExtUserPrmdata


ExtUserPrmData = 141 "ch. 1: HART status"
Bit(1) 1 0-1
Prm_Text_Ref = 2        ; off / on
EndExtUserPrmdata

ExtUserPrmData = 142 "ch. 2: HART status"
Bit(1) 1 0-1
Prm_Text_Ref = 2        ; off / on
EndExtUserPrmdata

ExtUserPrmData = 143 "ch. 3: HART status"
Bit(1) 1 0-1
Prm_Text_Ref = 2        ; off / on
EndExtUserPrmdata

ExtUserPrmData = 144 "ch. 4: HART status"
Bit(1) 1 0-1
Prm_Text_Ref = 2        ; off / on
EndExtUserPrmdata


ExtUserPrmData = 149 "ch. 1: line resistance"
BitArea(0-3) 0 0-15
Prm_Text_Ref = 145      ; base + 0 / base + 0.5Ohm / ...
EndExtUserPrmdata

ExtUserPrmData = 150 "ch. 2: line resistance"
BitArea(0-3) 0 0-15
Prm_Text_Ref = 145      ; base + 0 / base + 0.5Ohm / ...
EndExtUserPrmdata

ExtUserPrmData = 151 "ch. 3: line resistance"
BitArea(0-3) 0 0-15
Prm_Text_Ref = 145      ; base + 0 / base + 0.5Ohm / ...
EndExtUserPrmdata

ExtUserPrmData = 152 "ch. 4: line resistance"
BitArea(0-3) 0 0-15
Prm_Text_Ref = 145      ; base + 0 / base + 0.5Ohm / ...
EndExtUserPrmdata


ExtUserPrmData = 157 "ch. 1: fix junc. temp."
BitArea(1-3) 0 0-7
Prm_Text_Ref = 157      ; 0 / 10 / 20...
EndExtUserPrmdata

ExtUserPrmData = 158 "ch. 2: fix junc. temp."
BitArea(1-3) 0 0-7
Prm_Text_Ref = 157      ; 0 / 10 / 20...
EndExtUserPrmdata

ExtUserPrmData = 159 "ch. 3: fix junc. temp."
BitArea(1-3) 0 0-7
Prm_Text_Ref = 157      ; 0 / 10 / 20...
EndExtUserPrmdata

ExtUserPrmData = 160 "ch. 4: fix junc. temp."
BitArea(1-3) 0 0-7
Prm_Text_Ref = 157      ; 0 / 10 / 20...
EndExtUserPrmdata


ExtUserPrmData = 161 "connection"
BitArea(6-7) 3 0-3
Prm_Text_Ref = 161      ; 2w / 3w / ...
EndExtUserPrmdata


ExtUserPrmData = 162 "sensor type"
BitArea(0-3) 0 0,1,2,3,4,5,6,7,8,11,13,14,15
Prm_Text_Ref = 162      ; PT100 /PT200 / ...
EndExtUserPrmdata

ExtUserPrmData = 163 "sensor type"
BitArea(0-3) 0 0,1,2,3,4,5,6,7,8,9,10,11,13,15
Prm_Text_Ref = 163      ; type B / E / ...
EndExtUserPrmdata

ExtUserPrmData = 164 "CJC"
BitArea(6-7) 2 0-3
Prm_Text_Ref = 164      ; no / internal / ...
EndExtUserPrmdata

ExtUserPrmData = 179 "A1: line monitoring"
Bit(0) 0 0,1
Prm_Text_Ref = 1        ; on / off
EndExtUserPrmdata

ExtUserPrmData = 180 "A2: line monitoring"
Bit(1) 0 0,1
Prm_Text_Ref = 1        ; on / off
EndExtUserPrmdata

ExtUserPrmData = 181 "A3: line monitoring"
Bit(2) 0 0,1
Prm_Text_Ref = 1        ; on / off
EndExtUserPrmdata

ExtUserPrmData = 182 "A4: line monitoring"
Bit(3) 0 0,1
Prm_Text_Ref = 1        ; on / off
EndExtUserPrmdata

ExtUserPrmData = 183 "B1: line monitoring"
Bit(4) 0 0,1
Prm_Text_Ref = 1        ; on / off
EndExtUserPrmdata

ExtUserPrmData = 184 "B2: line monitoring"
Bit(5) 0 0,1
Prm_Text_Ref = 1        ; on / off
EndExtUserPrmdata

ExtUserPrmData = 185 "B3: line monitoring"
Bit(6) 0 0,1
Prm_Text_Ref = 1        ; on / off
EndExtUserPrmdata

ExtUserPrmData = 186 "B4: line monitoring"
Bit(7) 0 0,1
Prm_Text_Ref = 1        ; on / off
EndExtUserPrmdata

ExtUserPrmData = 187 "A: counter reset"
Bit(0) 0 0,1
Prm_Text_Ref = 187      ; internal / external
EndExtUserPrmdata

ExtUserPrmData = 188 "B: counter reset"
Bit(0) 0 0,1
Prm_Text_Ref = 187      ; internal / external
EndExtUserPrmdata

ExtUserPrmData = 189 "A: damping control inputs"
Bit(1) 0 0,1
Prm_Text_Ref = 189      ; off / 50ms
EndExtUserPrmdata

ExtUserPrmData = 190 "B: damping control inputs"
Bit(1) 0 0,1
Prm_Text_Ref = 189      ; off / 50ms
EndExtUserPrmdata

ExtUserPrmData = 191 "A: direction detection"
BitArea(2-3) 0 0,1,2,3
Prm_Text_Ref = 191      ; internal positive / internal negative ...
EndExtUserPrmdata

ExtUserPrmData = 192 "B: direction detection"
BitArea(2-3) 0 0,1,2,3
Prm_Text_Ref = 191      ; internal positive / internal negative ...
EndExtUserPrmdata

ExtUserPrmData = 193 "A: failsafe mode outputs"
BitArea(4-5) 0 0,1,2
Prm_Text_Ref = 71       ; min / max ...
EndExtUserPrmdata

ExtUserPrmData = 194 "B: failsafe mode outputs"
BitArea(4-5) 0 0,1,2
Prm_Text_Ref = 71       ; min / max ...
EndExtUserPrmdata

ExtUserPrmData = 195 "A: failsafe mode inputs"
BitArea(6-7) 0 0,1,2
Prm_Text_Ref = 71       ; min / max ...
EndExtUserPrmdata

ExtUserPrmData = 196 "B: failsafe mode inputs"
BitArea(6-7) 0 0,1,2
Prm_Text_Ref = 71       ; min / max ...
EndExtUserPrmdata

ExtUserPrmData = 197 "A1: polarity"
Bit(0) 0 0,1
Prm_Text_Ref = 87       ; norm. / inv.
EndExtUserPrmdata

ExtUserPrmData = 198 "A2: polarity"
Bit(1) 0 0,1
Prm_Text_Ref = 87       ; norm. / inv.
EndExtUserPrmdata

ExtUserPrmData = 199 "A3: polarity"
Bit(2) 0 0,1
Prm_Text_Ref = 87       ; norm. / inv.
EndExtUserPrmdata

ExtUserPrmData = 200 "A4: polarity"
Bit(3) 0 0,1
Prm_Text_Ref = 87       ; norm. / inv.
EndExtUserPrmdata

ExtUserPrmData = 201 "B1: polarity"
Bit(0) 0 0,1
Prm_Text_Ref = 87       ; norm. / inv.
EndExtUserPrmdata

ExtUserPrmData = 202 "B2: polarity"
Bit(1) 0 0,1
Prm_Text_Ref = 87       ; norm. / inv.
EndExtUserPrmdata

ExtUserPrmData = 203 "B3: polarity"
Bit(2) 0 0,1
Prm_Text_Ref = 87       ; norm. / inv.
EndExtUserPrmdata

ExtUserPrmData = 204 "B4: polarity"
Bit(3) 0 0,1
Prm_Text_Ref = 87       ; norm. / inv.
EndExtUserPrmdata

ExtUserPrmData = 205 "A: range"
BitArea(4-5) 2 0,1,2
Prm_Text_Ref = 205      ; 0..100Hz / 0..1kHz ...
EndExtUserPrmdata

ExtUserPrmData = 206 "B: range"
BitArea(4-5) 2 0,1,2
Prm_Text_Ref = 205      ; 0..100Hz / 0..1kHz ...
EndExtUserPrmdata

ExtUserPrmData = 207 "A: gate"
Bit(6) 0 0,1
Prm_Text_Ref = 187      ; intern / extern
EndExtUserPrmdata

ExtUserPrmData = 208 "B: gate"
Bit(6) 0 0,1
Prm_Text_Ref = 187      ; intern / extern
EndExtUserPrmdata

ExtUserPrmData = 209 "A: count edges"
Bit(7) 0 0,1
Prm_Text_Ref = 209      ; rising / rising + falling
EndExtUserPrmdata

ExtUserPrmData = 210 "B: count edges"
Bit(7) 0 0,1
Prm_Text_Ref = 209      ; rising / rising + falling
EndExtUserPrmdata

ExtUserPrmData = 211 "A: cycle time"
Bit(0) 0 0,1
Prm_Text_Ref = 211      ; 0.1% / 1%
EndExtUserPrmdata

ExtUserPrmData = 212 "B: cycle time"
Bit(0) 0 0,1
Prm_Text_Ref = 211      ; 0.1% / 1%
EndExtUserPrmdata

ExtUserPrmData = 213 "A: average"
BitArea(6-7) 0 0,1,2,3
Prm_Text_Ref = 213      ; off / 4 / 8 / 16
EndExtUserPrmdata

ExtUserPrmData = 214 "B: average"
BitArea(6-7) 0 0,1,2,3
Prm_Text_Ref = 213      ; off / 4 / 8 / 16
EndExtUserPrmdata

ExtUserPrmData = 215 "channel 1"
Bit(0) 0 0,1
Prm_Text_Ref = 215      ; active / inactive
EndExtUserPrmdata

ExtUserPrmData = 216 "channel 2"
Bit(1) 0 0,1
Prm_Text_Ref = 215      ; active / inactive
EndExtUserPrmdata

ExtUserPrmData = 217 "channel 3"
Bit(2) 0 0,1
Prm_Text_Ref = 215      ; active / inactive
EndExtUserPrmdata

ExtUserPrmData = 218 "channel 4"
Bit(3) 0 0,1
Prm_Text_Ref = 215      ; active / inactive
EndExtUserPrmdata

ExtUserPrmData = 219 "channel 5"
Bit(4) 0 0,1
Prm_Text_Ref = 215      ; active / inactive
EndExtUserPrmdata

ExtUserPrmData = 220 "channel 6"
Bit(5) 0 0,1
Prm_Text_Ref = 215      ; active / inactive
EndExtUserPrmdata

ExtUserPrmData = 221 "channel 7"
Bit(6) 0 0,1
Prm_Text_Ref = 215      ; active / inactive
EndExtUserPrmdata

ExtUserPrmData = 222 "channel 8"
Bit(7) 0 0,1
Prm_Text_Ref = 215      ; active / inactive
EndExtUserPrmdata

ExtUserPrmData = 223 "ch. 1: failsafe mode"
BitArea(4-5) 0 0-3
Prm_Text_Ref = 223       ; min / max / lgv
EndExtUserPrmData

ExtUserPrmData = 224 "ch. 2: failsafe mode"
BitArea(4-5) 0 0-3
Prm_Text_Ref = 223       ; min / max / lgv
EndExtUserPrmData

ExtUserPrmData = 225 "ch. 3: failsafe mode"
BitArea(4-5) 0 0-3
Prm_Text_Ref = 223       ; min / max / lgv
EndExtUserPrmData

ExtUserPrmData = 226 "ch. 4: failsafe mode"
BitArea(4-5) 0 0-3
Prm_Text_Ref = 223       ; min / max / lgv
EndExtUserPrmData


;=============================================================================
; Device Specific Diagnosis 
;=============================================================================
;Unit_Diag_Bit(0000) = "tbd"
;Unit_Diag_Bit(0001) = "DPSE Status DIAG to implement"

; Status PDU header
Unit_Diag_Area = 0-7
Value(130) = "excom status diagnosis"
Unit_Diag_Area_End

Unit_Diag_Area = 8-9
Value(0) = "module / status"
Unit_Diag_Area_End

Unit_Diag_Area = 16-17
Value(0) = " "
Value(1) = "status active"
Value(2) = "status inactive"
Value(3) = "status reserved"
Unit_Diag_Area_End

; Slot 0
Unit_Diag_Area = 24-25
Value(0) = "Red. GDP valid / na."
Value(1) = "Red. GDP error"
Value(2) = "Red. GDP reserved"
Value(3) = "Red. GDP missing"
Unit_Diag_Area_End

; Slot 1
Unit_Diag_Area = 26-27
Value(0) = "valid          slot 1"
Value(1) = "failure        slot 1"
Value(2) = "wrong module   slot 1"
Value(3) = "missing module slot 1"
Unit_Diag_Area_End

; Slot 2
Unit_Diag_Area = 28-29
Value(0) = "valid          slot 2"
Value(1) = "failure        slot 2"
Value(2) = "wrong module   slot 2"
Value(3) = "missing module slot 2"
Unit_Diag_Area_End

; Slot 3
Unit_Diag_Area = 30-31
Value(0) = "valid          slot 3"
Value(1) = "failure        slot 3"
Value(2) = "wrong module   slot 3"
Value(3) = "missing module slot 3"
Unit_Diag_Area_End

; Slot 4
Unit_Diag_Area = 32-33
Value(0) = "valid          slot 4"
Value(1) = "failure        slot 4"
Value(2) = "wrong module   slot 4"
Value(3) = "missing module slot 4"
Unit_Diag_Area_End

; Slot 5
Unit_Diag_Area = 34-35
Value(0) = "valid          slot 5"
Value(1) = "failure        slot 5"
Value(2) = "wrong module   slot 5"
Value(3) = "missing module slot 5"
Unit_Diag_Area_End

; Slot 6
Unit_Diag_Area = 36-37
Value(0) = "valid          slot 6"
Value(1) = "failure        slot 6"
Value(2) = "wrong module   slot 6"
Value(3) = "missing module slot 6"
Unit_Diag_Area_End

; Slot 7
Unit_Diag_Area = 38-39
Value(0) = "valid          slot 7"
Value(1) = "failure        slot 7"
Value(2) = "wrong module   slot 7"
Value(3) = "missing module slot 7"
Unit_Diag_Area_End

; Slot 8
Unit_Diag_Area = 40-41
Value(0) = "valid          slot 8"
Value(1) = "failure        slot 8"
Value(2) = "wrong module   slot 8"
Value(3) = "missing module slot 8"
Unit_Diag_Area_End

; Slot 9
Unit_Diag_Area = 42-43
Value(0) = "valid          slot 9"
Value(1) = "failure        slot 9"
Value(2) = "wrong module   slot 9"
Value(3) = "missing module slot 9"
Unit_Diag_Area_End

; Slot 10
Unit_Diag_Area = 44-45
Value(0) = "valid          slot 10"
Value(1) = "failure        slot 10"
Value(2) = "wrong module   slot 10"
Value(3) = "missing module slot 10"
Unit_Diag_Area_End

; Slot 11
Unit_Diag_Area = 46-47
Value(0) = "valid          slot 11"
Value(1) = "failure        slot 11"
Value(2) = "wrong module   slot 11"
Value(3) = "missing module slot 11"
Unit_Diag_Area_End

; Slot 12
Unit_Diag_Area = 48-49
Value(0) = "valid          slot 12"
Value(1) = "failure        slot 12"
Value(2) = "wrong module   slot 12"
Value(3) = "missing module slot 12"
Unit_Diag_Area_End

; Slot 13
Unit_Diag_Area = 50-51
Value(0) = "valid          slot 13"
Value(1) = "failure        slot 13"
Value(2) = "wrong module   slot 13"
Value(3) = "missing module slot 13"
Unit_Diag_Area_End

; Slot 14
Unit_Diag_Area = 52-53
Value(0) = "valid          slot 14"
Value(1) = "failure        slot 14"
Value(2) = "wrong module   slot 14"
Value(3) = "missing module slot 14"
Unit_Diag_Area_End

; Slot 15
Unit_Diag_Area = 54-55
Value(0) = "valid          slot 15"
Value(1) = "failure        slot 15"
Value(2) = "wrong module   slot 15"
Value(3) = "missing module slot 15"
Unit_Diag_Area_End

; Slot 16
Unit_Diag_Area = 56-57
Value(0) = "valid          slot 16"
Value(1) = "failure        slot 16"
Value(2) = "wrong module   slot 16"
Value(3) = "missing module slot 16"
Unit_Diag_Area_End

;=============================================================================
; Module Definition
;=============================================================================

;Module= "--------------------------------" Max len = 32 Characters !

Module = "Empty slot" 0x00
1
Info_Text = " "
Ext_Module_Prm_Data_Len = 5
Ext_User_Prm_Data_Const(0) = 0x00, 0x00, 0x00, 0x00, 0x00
EndModule
;-----------------------------------------------------------------------------

Module = "GDP1,5Ex" 0x01,0x02
2
Info_Text = "Communication Interface, Profibus DPV1"
Ext_Module_Prm_Data_Len = 4
Ext_User_Prm_Data_Ref(0) = 11
Ext_User_Prm_Data_Ref(0) = 12 
Ext_User_Prm_Data_Ref(0) = 13
Ext_User_Prm_Data_Ref(0) = 14
Ext_User_Prm_Data_Ref(1) = 16
Ext_User_Prm_Data_Ref(1) = 18
Ext_User_Prm_Data_Ref(3) = 21
Ext_User_Prm_Data_Ref(3) = 15
Ext_User_Prm_Data_Ref(3) = 20
Ext_User_Prm_Data_Ref(2) = 26
Ext_User_Prm_Data_Ref(2) = 25
Ext_User_Prm_Data_Ref(0) = 22
Ext_User_Prm_Data_Ref(1) = 23
Ext_User_Prm_Data_Ref(1) = 24

Channel_Diag(16) = "ROM error"
Channel_Diag(17) = "RAM error"
Channel_Diag(18) = "EEPROM error"
Channel_Diag(19) = "Error 19"
Channel_Diag(20) = "Error 20"
Channel_Diag(21) = "Error 21"
Channel_Diag(22) = "No CAN communication"
Channel_Diag(23) = "Red. CAN missing"
Channel_Diag(24) = "Power supply 1 error"
Channel_Diag(25) = "Power supply 2 error"
Channel_Diag(26) = "Reset after watchdog"
Channel_Diag(27) = "Redundancy switchover"
Channel_Diag(28) = "Red. GDP missing"
Channel_Diag(29) = "Red. GDP not ready"
Channel_Diag(30) = "Red. GDP error"
Channel_Diag(31) = "Red. GDP no DP comm."
EndModule
;-----------------------------------------------------------------------------

Module = "GDP1,5Ex C" 0xC1,0x40,0x40,0x2D
45
Info_Text = "Communication Interface, Profibus DPV1, with cyclic data"
Ext_Module_Prm_Data_Len = 04
Ext_User_Prm_Data_Ref(0) = 11
Ext_User_Prm_Data_Ref(0) = 12 
Ext_User_Prm_Data_Ref(0) = 13
Ext_User_Prm_Data_Ref(0) = 14
Ext_User_Prm_Data_Ref(1) = 17
Ext_User_Prm_Data_Ref(1) = 18
Ext_User_Prm_Data_Ref(1) = 19
Ext_User_Prm_Data_Ref(3) = 21
Ext_User_Prm_Data_Ref(3) = 15
Ext_User_Prm_Data_Ref(3) = 20
Ext_User_Prm_Data_Ref(2) = 26
Ext_User_Prm_Data_Ref(2) = 25
Ext_User_Prm_Data_Ref(0) = 22
Ext_User_Prm_Data_Ref(1) = 23
Ext_User_Prm_Data_Ref(1) = 24

Channel_Diag(16) = "ROM error"
Channel_Diag(17) = "RAM error"
Channel_Diag(18) = "EEPROM error"
Channel_Diag(19) = "Error 19"
Channel_Diag(20) = "Error 20"
Channel_Diag(21) = "Error 21"
Channel_Diag(22) = "No CAN communication"
Channel_Diag(23) = "Red. CAN missing"
Channel_Diag(24) = "Power supply 1 error"
Channel_Diag(25) = "Power supply 2 error"
Channel_Diag(26) = "Reset after watchdog"
Channel_Diag(27) = "Redundancy switchover"
Channel_Diag(28) = "Red. GDP missing"
Channel_Diag(29) = "Red. GDP not ready"
Channel_Diag(30) = "Red. GDP error"
Channel_Diag(31) = "Red. GDP no DP comm."
EndModule
;-----------------------------------------------------------------------------

Module = "DM80Ex" 0xC1,0x00,0x00,0x04
4
Info_Text = "Digital I/O, 1 x 8 ch., initiator or I.S. valve"
Ext_Module_Prm_Data_Len = 5
Ext_User_Prm_Data_Ref(0) = 51
Ext_User_Prm_Data_Ref(0) = 59
Ext_User_Prm_Data_Ref(0) = 71
Ext_User_Prm_Data_Ref(0) = 79
Ext_User_Prm_Data_Ref(0) = 87
Ext_User_Prm_Data_Ref(0) = 95

Ext_User_Prm_Data_Ref(1) = 52
Ext_User_Prm_Data_Ref(1) = 60
Ext_User_Prm_Data_Ref(1) = 72
Ext_User_Prm_Data_Ref(1) = 80
Ext_User_Prm_Data_Ref(1) = 88
Ext_User_Prm_Data_Ref(1) = 96

Ext_User_Prm_Data_Ref(2) = 53
Ext_User_Prm_Data_Ref(2) = 61
Ext_User_Prm_Data_Ref(2) = 73
Ext_User_Prm_Data_Ref(2) = 81
Ext_User_Prm_Data_Ref(2) = 89
Ext_User_Prm_Data_Ref(2) = 97

Ext_User_Prm_Data_Ref(3) = 54
Ext_User_Prm_Data_Ref(3) = 62
Ext_User_Prm_Data_Ref(3) = 74
Ext_User_Prm_Data_Ref(3) = 82
Ext_User_Prm_Data_Ref(3) = 90
Ext_User_Prm_Data_Ref(3) = 98

Ext_User_Prm_Data_Ref(4) = 215
Ext_User_Prm_Data_Ref(4) = 216
Ext_User_Prm_Data_Ref(4) = 217
Ext_User_Prm_Data_Ref(4) = 218
Ext_User_Prm_Data_Ref(4) = 219
Ext_User_Prm_Data_Ref(4) = 220
Ext_User_Prm_Data_Ref(4) = 221
Ext_User_Prm_Data_Ref(4) = 222


Channel_Diag(16) = "Line error"
Channel_Diag(17) = "Forcing active"
Channel_Diag(18) = "Internal address conflict"
Channel_Diag(19) = "Unknown module configured"
Channel_Diag(20) = "Unknown module found"
Channel_Diag(21) = "Error 21"
Channel_Diag(22) = "Parameter inconsistent"
Channel_Diag(23) = "Error 23"
Channel_Diag(24) = "Error 24"
Channel_Diag(25) = "Error 25"
Channel_Diag(26) = "Error 26"
Channel_Diag(27) = "Error 27"
Channel_Diag(28) = "Error 28"
Channel_Diag(29) = "Error 29"
Channel_Diag(30) = "HART status error"
Channel_Diag(31) = "HART comm. error"
EndModule
;-----------------------------------------------------------------------------

Module = "DM80Ex S" 0xC1,0x00,0x01,0x05
5
Info_Text = "Digital I/O, 1 x 8 ch., initiator or I.S. valve, with status"
Ext_Module_Prm_Data_Len = 5
Ext_User_Prm_Data_Ref(0) = 51
Ext_User_Prm_Data_Ref(0) = 59
Ext_User_Prm_Data_Ref(0) = 71
Ext_User_Prm_Data_Ref(0) = 79
Ext_User_Prm_Data_Ref(0) = 87
Ext_User_Prm_Data_Ref(0) = 95

Ext_User_Prm_Data_Ref(1) = 52
Ext_User_Prm_Data_Ref(1) = 60
Ext_User_Prm_Data_Ref(1) = 72
Ext_User_Prm_Data_Ref(1) = 80
Ext_User_Prm_Data_Ref(1) = 88
Ext_User_Prm_Data_Ref(1) = 96

Ext_User_Prm_Data_Ref(2) = 53
Ext_User_Prm_Data_Ref(2) = 61
Ext_User_Prm_Data_Ref(2) = 73
Ext_User_Prm_Data_Ref(2) = 81
Ext_User_Prm_Data_Ref(2) = 89
Ext_User_Prm_Data_Ref(2) = 97

Ext_User_Prm_Data_Ref(3) = 54
Ext_User_Prm_Data_Ref(3) = 62
Ext_User_Prm_Data_Ref(3) = 74
Ext_User_Prm_Data_Ref(3) = 82
Ext_User_Prm_Data_Ref(3) = 90
Ext_User_Prm_Data_Ref(3) = 98

Ext_User_Prm_Data_Ref(4) = 215
Ext_User_Prm_Data_Ref(4) = 216
Ext_User_Prm_Data_Ref(4) = 217
Ext_User_Prm_Data_Ref(4) = 218
Ext_User_Prm_Data_Ref(4) = 219
Ext_User_Prm_Data_Ref(4) = 220
Ext_User_Prm_Data_Ref(4) = 221
Ext_User_Prm_Data_Ref(4) = 222


Channel_Diag(16) = "Line error"
Channel_Diag(17) = "Forcing active"
Channel_Diag(18) = "Internal address conflict"
Channel_Diag(19) = "Unknown module configured"
Channel_Diag(20) = "Unknown module found"
Channel_Diag(21) = "Error 21"
Channel_Diag(22) = "Parameter inconsistent"
Channel_Diag(23) = "Error 23"
Channel_Diag(24) = "Error 24"
Channel_Diag(25) = "Error 25"
Channel_Diag(26) = "Error 26"
Channel_Diag(27) = "Error 27"
Channel_Diag(28) = "Error 28"
Channel_Diag(29) = "Error 29"
Channel_Diag(30) = "HART status error"
Channel_Diag(31) = "HART comm. error"
EndModule
;-----------------------------------------------------------------------------

Module = "DM80Ex 8I" 0x41,0x00,0x06
6
Info_Text = "Digital Input, 1 x 8 ch., initiator"
Ext_Module_Prm_Data_Len = 5
Ext_User_Prm_Data_Ref(0) = 51
Ext_User_Prm_Data_Ref(0) = 59
Ext_User_Prm_Data_Ref(0) = 71
Ext_User_Prm_Data_Ref(0) = 87
Ext_User_Prm_Data_Ref(0) = 95

Ext_User_Prm_Data_Ref(1) = 52
Ext_User_Prm_Data_Ref(1) = 60
Ext_User_Prm_Data_Ref(1) = 72
Ext_User_Prm_Data_Ref(1) = 88
Ext_User_Prm_Data_Ref(1) = 96

Ext_User_Prm_Data_Ref(2) = 53
Ext_User_Prm_Data_Ref(2) = 61
Ext_User_Prm_Data_Ref(2) = 73
Ext_User_Prm_Data_Ref(2) = 89
Ext_User_Prm_Data_Ref(2) = 97

Ext_User_Prm_Data_Ref(3) = 54
Ext_User_Prm_Data_Ref(3) = 62
Ext_User_Prm_Data_Ref(3) = 74
Ext_User_Prm_Data_Ref(3) = 90
Ext_User_Prm_Data_Ref(3) = 98

Ext_User_Prm_Data_Ref(4) = 215
Ext_User_Prm_Data_Ref(4) = 216
Ext_User_Prm_Data_Ref(4) = 217
Ext_User_Prm_Data_Ref(4) = 218
Ext_User_Prm_Data_Ref(4) = 219
Ext_User_Prm_Data_Ref(4) = 220
Ext_User_Prm_Data_Ref(4) = 221
Ext_User_Prm_Data_Ref(4) = 222


Channel_Diag(16) = "Line error"
Channel_Diag(17) = "Forcing active"
Channel_Diag(18) = "Internal address conflict"
Channel_Diag(19) = "Unknown module configured"
Channel_Diag(20) = "Unknown module found"
Channel_Diag(21) = "Error 21"
Channel_Diag(22) = "Parameter inconsistent"
Channel_Diag(23) = "Error 23"
Channel_Diag(24) = "Error 24"
Channel_Diag(25) = "Error 25"
Channel_Diag(26) = "Error 26"
Channel_Diag(27) = "Error 27"
Channel_Diag(28) = "Error 28"
Channel_Diag(29) = "Error 29"
Channel_Diag(30) = "HART status error"
Channel_Diag(31) = "HART comm. error"
EndModule
;-----------------------------------------------------------------------------

Module = "DM80Ex S 8I" 0x41,0x01,0x07
7
Info_Text = "Digital Input, 1 x 8 ch., initiator, with status"
Ext_Module_Prm_Data_Len = 5
Ext_User_Prm_Data_Ref(0) = 51
Ext_User_Prm_Data_Ref(0) = 59
Ext_User_Prm_Data_Ref(0) = 71
Ext_User_Prm_Data_Ref(0) = 87
Ext_User_Prm_Data_Ref(0) = 95

Ext_User_Prm_Data_Ref(1) = 52
Ext_User_Prm_Data_Ref(1) = 60
Ext_User_Prm_Data_Ref(1) = 72
Ext_User_Prm_Data_Ref(1) = 88
Ext_User_Prm_Data_Ref(1) = 96

Ext_User_Prm_Data_Ref(2) = 53
Ext_User_Prm_Data_Ref(2) = 61
Ext_User_Prm_Data_Ref(2) = 73
Ext_User_Prm_Data_Ref(2) = 89
Ext_User_Prm_Data_Ref(2) = 97

Ext_User_Prm_Data_Ref(3) = 54
Ext_User_Prm_Data_Ref(3) = 62
Ext_User_Prm_Data_Ref(3) = 74
Ext_User_Prm_Data_Ref(3) = 90
Ext_User_Prm_Data_Ref(3) = 98

Ext_User_Prm_Data_Ref(4) = 215
Ext_User_Prm_Data_Ref(4) = 216
Ext_User_Prm_Data_Ref(4) = 217
Ext_User_Prm_Data_Ref(4) = 218
Ext_User_Prm_Data_Ref(4) = 219
Ext_User_Prm_Data_Ref(4) = 220
Ext_User_Prm_Data_Ref(4) = 221
Ext_User_Prm_Data_Ref(4) = 222


Channel_Diag(16) = "Line error"
Channel_Diag(17) = "Forcing active"
Channel_Diag(18) = "Internal address conflict"
Channel_Diag(19) = "Unknown module configured"
Channel_Diag(20) = "Unknown module found"
Channel_Diag(21) = "Error 21"
Channel_Diag(22) = "Parameter inconsistent"
Channel_Diag(23) = "Error 23"
Channel_Diag(24) = "Error 24"
Channel_Diag(25) = "Error 25"
Channel_Diag(26) = "Error 26"
Channel_Diag(27) = "Error 27"
Channel_Diag(28) = "Error 28"
Channel_Diag(29) = "Error 29"
Channel_Diag(30) = "HART status error"
Channel_Diag(31) = "HART comm. error"
EndModule
;-----------------------------------------------------------------------------

Module = "DO40Ex" 0x81,0x00,0x08
8
Info_Text = "Digital Output, 4 x 1 ch., I.S. valve"
Ext_Module_Prm_Data_Len = 5
Ext_User_Prm_Data_Ref(0) = 55
Ext_User_Prm_Data_Ref(0) = 63
Ext_User_Prm_Data_Ref(0) = 75
Ext_User_Prm_Data_Ref(0) = 91

Ext_User_Prm_Data_Ref(1) = 56
Ext_User_Prm_Data_Ref(1) = 64
Ext_User_Prm_Data_Ref(1) = 76
Ext_User_Prm_Data_Ref(1) = 92

Ext_User_Prm_Data_Ref(2) = 57
Ext_User_Prm_Data_Ref(2) = 65
Ext_User_Prm_Data_Ref(2) = 77
Ext_User_Prm_Data_Ref(2) = 93

Ext_User_Prm_Data_Ref(3) = 58
Ext_User_Prm_Data_Ref(3) = 66
Ext_User_Prm_Data_Ref(3) = 78
Ext_User_Prm_Data_Ref(3) = 94

Ext_User_Prm_Data_Const(4) = 0x00


Channel_Diag(16) = "Line error"
Channel_Diag(17) = "Forcing active"
Channel_Diag(18) = "Internal address conflict"
Channel_Diag(19) = "Unknown module configured"
Channel_Diag(20) = "Unknown module found"
Channel_Diag(21) = "Error 21"
Channel_Diag(22) = "Parameter inconsistent"
Channel_Diag(23) = "Error 23"
Channel_Diag(24) = "Error 24"
Channel_Diag(25) = "Error 25"
Channel_Diag(26) = "Error 26"
Channel_Diag(27) = "Error 27"
Channel_Diag(28) = "Error 28"
Channel_Diag(29) = "Error 29"
Channel_Diag(30) = "HART status error"
Channel_Diag(31) = "HART comm. error"
EndModule
;-----------------------------------------------------------------------------

Module = "DI40Ex" 0x41,0x00,0x09
9
Info_Text = "Digital Input, 4 x 1 ch., initiator, with status"
Ext_Module_Prm_Data_Len = 5
Ext_User_Prm_Data_Ref(0) = 55
Ext_User_Prm_Data_Ref(0) = 63
Ext_User_Prm_Data_Ref(0) = 75
Ext_User_Prm_Data_Ref(0) = 91
Ext_User_Prm_Data_Ref(0) = 99

Ext_User_Prm_Data_Ref(1) = 56
Ext_User_Prm_Data_Ref(1) = 64
Ext_User_Prm_Data_Ref(1) = 76
Ext_User_Prm_Data_Ref(1) = 92
Ext_User_Prm_Data_Ref(1) = 100

Ext_User_Prm_Data_Ref(2) = 57
Ext_User_Prm_Data_Ref(2) = 65
Ext_User_Prm_Data_Ref(2) = 77
Ext_User_Prm_Data_Ref(2) = 93
Ext_User_Prm_Data_Ref(2) = 101

Ext_User_Prm_Data_Ref(3) = 58
Ext_User_Prm_Data_Ref(3) = 66
Ext_User_Prm_Data_Ref(3) = 78
Ext_User_Prm_Data_Ref(3) = 94
Ext_User_Prm_Data_Ref(3) = 102

Ext_User_Prm_Data_Const(4) = 0x00


Channel_Diag(16) = "Line error"
Channel_Diag(17) = "Forcing active"
Channel_Diag(18) = "Internal address conflict"
Channel_Diag(19) = "Unknown module configured"
Channel_Diag(20) = "Unknown module found"
Channel_Diag(21) = "Error 21"
Channel_Diag(22) = "Parameter inconsistent"
Channel_Diag(23) = "Error 23"
Channel_Diag(24) = "Error 24"
Channel_Diag(25) = "Error 25"
Channel_Diag(26) = "Error 26"
Channel_Diag(27) = "Error 27"
Channel_Diag(28) = "Error 28"
Channel_Diag(29) = "Error 29"
Channel_Diag(30) = "HART status error"
Channel_Diag(31) = "HART comm. error"
EndModule
;-----------------------------------------------------------------------------

Module = "DF20Ex P" 0xC1,0x01,0x07,0x0A
10
Info_Text = "Pulse counter, 2 blocks"
Ext_Module_Prm_Data_Len = 5
Ext_User_Prm_Data_Ref(0) = 179
Ext_User_Prm_Data_Ref(0) = 180
Ext_User_Prm_Data_Ref(0) = 181
Ext_User_Prm_Data_Ref(0) = 182
Ext_User_Prm_Data_Ref(1) = 195
Ext_User_Prm_Data_Ref(1) = 193
Ext_User_Prm_Data_Ref(1) = 191
Ext_User_Prm_Data_Ref(1) = 187
Ext_User_Prm_Data_Ref(2) = 209
Ext_User_Prm_Data_Ref(2) = 207
Ext_User_Prm_Data_Ref(2) = 205
Ext_User_Prm_Data_Ref(1) = 189
Ext_User_Prm_Data_Ref(2) = 197
Ext_User_Prm_Data_Ref(2) = 198
Ext_User_Prm_Data_Ref(2) = 199
Ext_User_Prm_Data_Ref(2) = 200

Ext_User_Prm_Data_Ref(0) = 183
Ext_User_Prm_Data_Ref(0) = 184
Ext_User_Prm_Data_Ref(0) = 185
Ext_User_Prm_Data_Ref(0) = 186
Ext_User_Prm_Data_Ref(3) = 196
Ext_User_Prm_Data_Ref(3) = 194
Ext_User_Prm_Data_Ref(3) = 192
Ext_User_Prm_Data_Ref(3) = 188
Ext_User_Prm_Data_Ref(4) = 210
Ext_User_Prm_Data_Ref(4) = 208
Ext_User_Prm_Data_Ref(4) = 206
Ext_User_Prm_Data_Ref(3) = 190
Ext_User_Prm_Data_Ref(4) = 201
Ext_User_Prm_Data_Ref(4) = 202
Ext_User_Prm_Data_Ref(4) = 203
Ext_User_Prm_Data_Ref(4) = 204


Channel_Diag(16) = "Line error"
Channel_Diag(17) = "Forcing active"
Channel_Diag(18) = "Internal address conflict"
Channel_Diag(19) = "Unknown module configured"
Channel_Diag(20) = "Unknown module found"
Channel_Diag(21) = "Error 21"
Channel_Diag(22) = "Parameter inconsistent"
Channel_Diag(23) = "Error 23"
Channel_Diag(24) = "Error 24"
Channel_Diag(25) = "Error 25"
Channel_Diag(26) = "Error 26"
Channel_Diag(27) = "Error 27"
Channel_Diag(28) = "Error 28"
Channel_Diag(29) = "Error 29"
Channel_Diag(30) = "HART status error"
Channel_Diag(31) = "HART comm. error"
EndModule
;-----------------------------------------------------------------------------

Module = "DF20Ex F" 0xc1,0x01,0x07,0x2E
46
Info_Text = "Frequency input, 2 blocks"
Ext_Module_Prm_Data_Len = 5
Ext_User_Prm_Data_Ref(0) = 179
Ext_User_Prm_Data_Ref(0) = 180
Ext_User_Prm_Data_Ref(0) = 181
Ext_User_Prm_Data_Ref(0) = 182
Ext_User_Prm_Data_Ref(1) = 195
Ext_User_Prm_Data_Ref(1) = 193
Ext_User_Prm_Data_Ref(1) = 191
Ext_User_Prm_Data_Ref(1) = 211
Ext_User_Prm_Data_Ref(2) = 213
Ext_User_Prm_Data_Ref(1) = 189
Ext_User_Prm_Data_Ref(2) = 197
Ext_User_Prm_Data_Ref(2) = 198
Ext_User_Prm_Data_Ref(2) = 199
Ext_User_Prm_Data_Ref(2) = 200

Ext_User_Prm_Data_Ref(0) = 183
Ext_User_Prm_Data_Ref(0) = 184
Ext_User_Prm_Data_Ref(0) = 185
Ext_User_Prm_Data_Ref(0) = 186
Ext_User_Prm_Data_Ref(3) = 196
Ext_User_Prm_Data_Ref(3) = 194
Ext_User_Prm_Data_Ref(3) = 192
Ext_User_Prm_Data_Ref(3) = 212
Ext_User_Prm_Data_Ref(4) = 214
Ext_User_Prm_Data_Ref(3) = 190
Ext_User_Prm_Data_Ref(4) = 201
Ext_User_Prm_Data_Ref(4) = 202
Ext_User_Prm_Data_Ref(4) = 203
Ext_User_Prm_Data_Ref(4) = 204


Channel_Diag(16) = "Line error"
Channel_Diag(17) = "Forcing active"
Channel_Diag(18) = "Internal address conflict"
Channel_Diag(19) = "Unknown module configured"
Channel_Diag(20) = "Unknown module found"
Channel_Diag(21) = "Error 21"
Channel_Diag(22) = "Parameter inconsistent"
Channel_Diag(23) = "Error 23"
Channel_Diag(24) = "Error 24"
Channel_Diag(25) = "Error 25"
Channel_Diag(26) = "Error 26"
Channel_Diag(27) = "Error 27"
Channel_Diag(28) = "Error 28"
Channel_Diag(29) = "Error 29"
Channel_Diag(30) = "HART status error"
Channel_Diag(31) = "HART comm. error"
EndModule
;-----------------------------------------------------------------------------

Module = "AIH40Ex" 0x41,0x43,0x0B
11
Info_Text = "Analog input, 1 x 4 ch., 0/4..20mA, active HART"
Ext_Module_Prm_Data_Len = 5
Ext_User_Prm_Data_Ref(0) = 55
Ext_User_Prm_Data_Ref(0) = 63
Ext_User_Prm_Data_Ref(0) = 75
Ext_User_Prm_Data_Ref(0) = 119
Ext_User_Prm_Data_Ref(0) = 103

Ext_User_Prm_Data_Ref(1) = 56
Ext_User_Prm_Data_Ref(1) = 64
Ext_User_Prm_Data_Ref(1) = 76
Ext_User_Prm_Data_Ref(1) = 120
Ext_User_Prm_Data_Ref(1) = 104

Ext_User_Prm_Data_Ref(2) = 57
Ext_User_Prm_Data_Ref(2) = 65
Ext_User_Prm_Data_Ref(2) = 77
Ext_User_Prm_Data_Ref(2) = 121
Ext_User_Prm_Data_Ref(2) = 105

Ext_User_Prm_Data_Ref(3) = 58
Ext_User_Prm_Data_Ref(3) = 66
Ext_User_Prm_Data_Ref(3) = 78
Ext_User_Prm_Data_Ref(3) = 122
Ext_User_Prm_Data_Ref(3) = 106

Ext_User_Prm_Data_Const(4) = 0x00


Channel_Diag(16) = "Line error"
Channel_Diag(17) = "Forcing active"
Channel_Diag(18) = "Internal address conflict"
Channel_Diag(19) = "Unknown module configured"
Channel_Diag(20) = "Unknown module found"
Channel_Diag(21) = "Error 21"
Channel_Diag(22) = "Parameter inconsistent"
Channel_Diag(23) = "Error 23"
Channel_Diag(24) = "Error 24"
Channel_Diag(25) = "Error 25"
Channel_Diag(26) = "Error 26"
Channel_Diag(27) = "Error 27"
Channel_Diag(28) = "Error 28"
Channel_Diag(29) = "Error 29"
Channel_Diag(30) = "HART status error"
Channel_Diag(31) = "HART comm. error"
EndModule
;-----------------------------------------------------------------------------

Module = "AIH40Ex 1H " 0x41,0x45,0x0C
12
Info_Text = "Analog input, 1 x 4 ch., 0/4..20mA, active, 1 cyclic HART variable"
Ext_Module_Prm_Data_Len = 5
Ext_User_Prm_Data_Ref(0) = 55
Ext_User_Prm_Data_Ref(0) = 63
Ext_User_Prm_Data_Ref(0) = 75
Ext_User_Prm_Data_Ref(0) = 119
Ext_User_Prm_Data_Ref(0) = 103

Ext_User_Prm_Data_Ref(1) = 56
Ext_User_Prm_Data_Ref(1) = 64
Ext_User_Prm_Data_Ref(1) = 76
Ext_User_Prm_Data_Ref(1) = 120
Ext_User_Prm_Data_Ref(1) = 104

Ext_User_Prm_Data_Ref(2) = 57
Ext_User_Prm_Data_Ref(2) = 65
Ext_User_Prm_Data_Ref(2) = 77
Ext_User_Prm_Data_Ref(2) = 121
Ext_User_Prm_Data_Ref(2) = 105

Ext_User_Prm_Data_Ref(3) = 58
Ext_User_Prm_Data_Ref(3) = 66
Ext_User_Prm_Data_Ref(3) = 78
Ext_User_Prm_Data_Ref(3) = 122
Ext_User_Prm_Data_Ref(3) = 106

Ext_User_Prm_Data_Ref(4) = 123
Ext_User_Prm_Data_Ref(4) = 124


Channel_Diag(16) = "Line error"
Channel_Diag(17) = "Forcing active"
Channel_Diag(18) = "Internal address conflict"
Channel_Diag(19) = "Unknown module configured"
Channel_Diag(20) = "Unknown module found"
Channel_Diag(21) = "Error 21"
Channel_Diag(22) = "Parameter inconsistent"
Channel_Diag(23) = "Error 23"
Channel_Diag(24) = "Error 24"
Channel_Diag(25) = "Error 25"
Channel_Diag(26) = "Error 26"
Channel_Diag(27) = "Error 27"
Channel_Diag(28) = "Error 28"
Channel_Diag(29) = "Error 29"
Channel_Diag(30) = "HART status error"
Channel_Diag(31) = "HART comm. error"
EndModule
;-----------------------------------------------------------------------------

Module = "AIH40Ex 4H " 0x41,0x4B,0x0D
13
Info_Text = "Analog input, 1 x 4 ch., 4..20mA, active, 4 cyclic HART variables"
Ext_Module_Prm_Data_Len = 5
Ext_User_Prm_Data_Ref(0) = 55
Ext_User_Prm_Data_Ref(0) = 63
Ext_User_Prm_Data_Ref(0) = 75
Ext_User_Prm_Data_Ref(0) = 103
Ext_User_Prm_Data_Ref(4) = 128
Ext_User_Prm_Data_Ref(4) = 127
Ext_User_Prm_Data_Ref(0) = 126
Ext_User_Prm_Data_Ref(0) = 125

Ext_User_Prm_Data_Ref(1) = 56
Ext_User_Prm_Data_Ref(1) = 64
Ext_User_Prm_Data_Ref(1) = 76
Ext_User_Prm_Data_Ref(1) = 104
Ext_User_Prm_Data_Ref(4) = 132
Ext_User_Prm_Data_Ref(4) = 131
Ext_User_Prm_Data_Ref(1) = 130
Ext_User_Prm_Data_Ref(1) = 129

Ext_User_Prm_Data_Ref(2) = 57
Ext_User_Prm_Data_Ref(2) = 65
Ext_User_Prm_Data_Ref(2) = 77
Ext_User_Prm_Data_Ref(2) = 105
Ext_User_Prm_Data_Ref(4) = 136
Ext_User_Prm_Data_Ref(4) = 135
Ext_User_Prm_Data_Ref(2) = 134
Ext_User_Prm_Data_Ref(2) = 133

Ext_User_Prm_Data_Ref(3) = 58
Ext_User_Prm_Data_Ref(3) = 66
Ext_User_Prm_Data_Ref(3) = 78
Ext_User_Prm_Data_Ref(3) = 106
Ext_User_Prm_Data_Ref(4) = 140
Ext_User_Prm_Data_Ref(4) = 139
Ext_User_Prm_Data_Ref(3) = 138
Ext_User_Prm_Data_Ref(3) = 137


Channel_Diag(16) = "Line error"
Channel_Diag(17) = "Forcing active"
Channel_Diag(18) = "Internal address conflict"
Channel_Diag(19) = "Unknown module configured"
Channel_Diag(20) = "Unknown module found"
Channel_Diag(21) = "Error 21"
Channel_Diag(22) = "Parameter inconsistent"
Channel_Diag(23) = "Error 23"
Channel_Diag(24) = "Error 24"
Channel_Diag(25) = "Error 25"
Channel_Diag(26) = "Error 26"
Channel_Diag(27) = "Error 27"
Channel_Diag(28) = "Error 28"
Channel_Diag(29) = "Error 29"
Channel_Diag(30) = "HART status error"
Channel_Diag(31) = "HART comm. error"
EndModule
;-----------------------------------------------------------------------------

Module = "AIH40Ex 8H " 0x41,0x53,0x0E
14
Info_Text = "Analog input, 1 x 4 ch., 4..20mA, active, 8 cyclic HART variables"
Ext_Module_Prm_Data_Len = 5
Ext_User_Prm_Data_Ref(0) = 55
Ext_User_Prm_Data_Ref(0) = 63
Ext_User_Prm_Data_Ref(0) = 75
Ext_User_Prm_Data_Ref(0) = 103
Ext_User_Prm_Data_Ref(4) = 128
Ext_User_Prm_Data_Ref(4) = 127
Ext_User_Prm_Data_Ref(0) = 126
Ext_User_Prm_Data_Ref(0) = 125

Ext_User_Prm_Data_Ref(1) = 56
Ext_User_Prm_Data_Ref(1) = 64
Ext_User_Prm_Data_Ref(1) = 76
Ext_User_Prm_Data_Ref(1) = 104
Ext_User_Prm_Data_Ref(4) = 132
Ext_User_Prm_Data_Ref(4) = 131
Ext_User_Prm_Data_Ref(1) = 130
Ext_User_Prm_Data_Ref(1) = 129

Ext_User_Prm_Data_Ref(2) = 57
Ext_User_Prm_Data_Ref(2) = 65
Ext_User_Prm_Data_Ref(2) = 77
Ext_User_Prm_Data_Ref(2) = 105
Ext_User_Prm_Data_Ref(4) = 136
Ext_User_Prm_Data_Ref(4) = 135
Ext_User_Prm_Data_Ref(2) = 134
Ext_User_Prm_Data_Ref(2) = 133

Ext_User_Prm_Data_Ref(3) = 58
Ext_User_Prm_Data_Ref(3) = 66
Ext_User_Prm_Data_Ref(3) = 78
Ext_User_Prm_Data_Ref(3) = 106
Ext_User_Prm_Data_Ref(4) = 140
Ext_User_Prm_Data_Ref(4) = 139
Ext_User_Prm_Data_Ref(3) = 138
Ext_User_Prm_Data_Ref(3) = 137


Channel_Diag(16) = "Line error"
Channel_Diag(17) = "Forcing active"
Channel_Diag(18) = "Internal address conflict"
Channel_Diag(19) = "Unknown module configured"
Channel_Diag(20) = "Unknown module found"
Channel_Diag(21) = "Error 21"
Channel_Diag(22) = "Parameter inconsistent"
Channel_Diag(23) = "Error 23"
Channel_Diag(24) = "Error 24"
Channel_Diag(25) = "Error 25"
Channel_Diag(26) = "Error 26"
Channel_Diag(27) = "Error 27"
Channel_Diag(28) = "Error 28"
Channel_Diag(29) = "Error 29"
Channel_Diag(30) = "HART status error"
Channel_Diag(31) = "HART comm. error"
EndModule
;-----------------------------------------------------------------------------

Module = "AIH41Ex " 0x41,0x43,0x13
19
Info_Text = "Analog input, 1 x 4 ch., 0/4..20mA, passive HART"
Ext_Module_Prm_Data_Len = 5
Ext_User_Prm_Data_Ref(0) = 67
Ext_User_Prm_Data_Ref(0) = 75
Ext_User_Prm_Data_Ref(0) = 119
Ext_User_Prm_Data_Ref(0) = 103

Ext_User_Prm_Data_Ref(1) = 68
Ext_User_Prm_Data_Ref(1) = 76
Ext_User_Prm_Data_Ref(1) = 120
Ext_User_Prm_Data_Ref(1) = 104

Ext_User_Prm_Data_Ref(2) = 69
Ext_User_Prm_Data_Ref(2) = 77
Ext_User_Prm_Data_Ref(2) = 121
Ext_User_Prm_Data_Ref(2) = 105

Ext_User_Prm_Data_Ref(3) = 70
Ext_User_Prm_Data_Ref(3) = 78
Ext_User_Prm_Data_Ref(3) = 122
Ext_User_Prm_Data_Ref(3) = 106

Ext_User_Prm_Data_Const(4) = 0x00


Channel_Diag(16) = "Line error"
Channel_Diag(17) = "Forcing active"
Channel_Diag(18) = "Internal address conflict"
Channel_Diag(19) = "Unknown module configured"
Channel_Diag(20) = "Unknown module found"
Channel_Diag(21) = "Error 21"
Channel_Diag(22) = "Parameter inconsistent"
Channel_Diag(23) = "Error 23"
Channel_Diag(24) = "Error 24"
Channel_Diag(25) = "Error 25"
Channel_Diag(26) = "Error 26"
Channel_Diag(27) = "Error 27"
Channel_Diag(28) = "Error 28"
Channel_Diag(29) = "Error 29"
Channel_Diag(30) = "HART status error"
Channel_Diag(31) = "HART comm. error"
EndModule
;-----------------------------------------------------------------------------

Module = "AIH41Ex 1H " 0x41,0x45,0x14
20
Info_Text = "Analog input, 1 x 4 ch., 0/4..20mA, passive, 1 cyclic HART variable"
Ext_Module_Prm_Data_Len = 5
Ext_User_Prm_Data_Ref(0) = 67
Ext_User_Prm_Data_Ref(0) = 75
Ext_User_Prm_Data_Ref(0) = 119
Ext_User_Prm_Data_Ref(0) = 103

Ext_User_Prm_Data_Ref(1) = 68
Ext_User_Prm_Data_Ref(1) = 76
Ext_User_Prm_Data_Ref(1) = 120
Ext_User_Prm_Data_Ref(1) = 104

Ext_User_Prm_Data_Ref(2) = 69
Ext_User_Prm_Data_Ref(2) = 77
Ext_User_Prm_Data_Ref(2) = 121
Ext_User_Prm_Data_Ref(2) = 105

Ext_User_Prm_Data_Ref(3) = 70
Ext_User_Prm_Data_Ref(3) = 78
Ext_User_Prm_Data_Ref(3) = 122
Ext_User_Prm_Data_Ref(3) = 106

Ext_User_Prm_Data_Ref(4) = 123
Ext_User_Prm_Data_Ref(4) = 124


Channel_Diag(16) = "Line error"
Channel_Diag(17) = "Forcing active"
Channel_Diag(18) = "Internal address conflict"
Channel_Diag(19) = "Unknown module configured"
Channel_Diag(20) = "Unknown module found"
Channel_Diag(21) = "Error 21"
Channel_Diag(22) = "Parameter inconsistent"
Channel_Diag(23) = "Error 23"
Channel_Diag(24) = "Error 24"
Channel_Diag(25) = "Error 25"
Channel_Diag(26) = "Error 26"
Channel_Diag(27) = "Error 27"
Channel_Diag(28) = "Error 28"
Channel_Diag(29) = "Error 29"
Channel_Diag(30) = "HART status error"
Channel_Diag(31) = "HART comm. error"
EndModule
;-----------------------------------------------------------------------------

Module = "AIH41Ex 4H " 0x41,0x4B,0x15
21
Info_Text = "Analog input, 1 x 4 ch., 4..20mA, passive, 4 cyclic HART variables"
Ext_Module_Prm_Data_Len = 5
Ext_User_Prm_Data_Ref(0) = 67
Ext_User_Prm_Data_Ref(0) = 75
Ext_User_Prm_Data_Ref(0) = 103
Ext_User_Prm_Data_Ref(4) = 128
Ext_User_Prm_Data_Ref(4) = 127
Ext_User_Prm_Data_Ref(0) = 126
Ext_User_Prm_Data_Ref(0) = 125

Ext_User_Prm_Data_Ref(1) = 68
Ext_User_Prm_Data_Ref(1) = 76
Ext_User_Prm_Data_Ref(1) = 104
Ext_User_Prm_Data_Ref(4) = 132
Ext_User_Prm_Data_Ref(4) = 131
Ext_User_Prm_Data_Ref(1) = 130
Ext_User_Prm_Data_Ref(1) = 129

Ext_User_Prm_Data_Ref(2) = 69
Ext_User_Prm_Data_Ref(2) = 77
Ext_User_Prm_Data_Ref(2) = 105
Ext_User_Prm_Data_Ref(4) = 136
Ext_User_Prm_Data_Ref(4) = 135
Ext_User_Prm_Data_Ref(2) = 134
Ext_User_Prm_Data_Ref(2) = 133

Ext_User_Prm_Data_Ref(3) = 70
Ext_User_Prm_Data_Ref(3) = 78
Ext_User_Prm_Data_Ref(3) = 106
Ext_User_Prm_Data_Ref(4) = 140
Ext_User_Prm_Data_Ref(4) = 139
Ext_User_Prm_Data_Ref(3) = 138
Ext_User_Prm_Data_Ref(3) = 137


Channel_Diag(16) = "Line error"
Channel_Diag(17) = "Forcing active"
Channel_Diag(18) = "Internal address conflict"
Channel_Diag(19) = "Unknown module configured"
Channel_Diag(20) = "Unknown module found"
Channel_Diag(21) = "Error 21"
Channel_Diag(22) = "Parameter inconsistent"
Channel_Diag(23) = "Error 23"
Channel_Diag(24) = "Error 24"
Channel_Diag(25) = "Error 25"
Channel_Diag(26) = "Error 26"
Channel_Diag(27) = "Error 27"
Channel_Diag(28) = "Error 28"
Channel_Diag(29) = "Error 29"
Channel_Diag(30) = "HART status error"
Channel_Diag(31) = "HART comm. error"
EndModule
;-----------------------------------------------------------------------------

Module = "AIH41Ex 8H " 0x41,0x53,0x16
22
Info_Text = "Analog input, 1 x 4 ch., 4..20mA, passive, 8 cyclic HART variables"
Ext_Module_Prm_Data_Len = 5
Ext_User_Prm_Data_Ref(0) = 67
Ext_User_Prm_Data_Ref(0) = 75
Ext_User_Prm_Data_Ref(0) = 103
Ext_User_Prm_Data_Ref(4) = 128
Ext_User_Prm_Data_Ref(4) = 127
Ext_User_Prm_Data_Ref(0) = 126
Ext_User_Prm_Data_Ref(0) = 125

Ext_User_Prm_Data_Ref(1) = 68
Ext_User_Prm_Data_Ref(1) = 76
Ext_User_Prm_Data_Ref(1) = 104
Ext_User_Prm_Data_Ref(4) = 132
Ext_User_Prm_Data_Ref(4) = 131
Ext_User_Prm_Data_Ref(1) = 130
Ext_User_Prm_Data_Ref(1) = 129

Ext_User_Prm_Data_Ref(2) = 69
Ext_User_Prm_Data_Ref(2) = 77
Ext_User_Prm_Data_Ref(2) = 105
Ext_User_Prm_Data_Ref(4) = 136
Ext_User_Prm_Data_Ref(4) = 135
Ext_User_Prm_Data_Ref(2) = 134
Ext_User_Prm_Data_Ref(2) = 133

Ext_User_Prm_Data_Ref(3) = 70
Ext_User_Prm_Data_Ref(3) = 78
Ext_User_Prm_Data_Ref(3) = 106
Ext_User_Prm_Data_Ref(4) = 140
Ext_User_Prm_Data_Ref(4) = 139
Ext_User_Prm_Data_Ref(3) = 138
Ext_User_Prm_Data_Ref(3) = 137


Channel_Diag(16) = "Line error"
Channel_Diag(17) = "Forcing active"
Channel_Diag(18) = "Internal address conflict"
Channel_Diag(19) = "Unknown module configured"
Channel_Diag(20) = "Unknown module found"
Channel_Diag(21) = "Error 21"
Channel_Diag(22) = "Parameter inconsistent"
Channel_Diag(23) = "Error 23"
Channel_Diag(24) = "Error 24"
Channel_Diag(25) = "Error 25"
Channel_Diag(26) = "Error 26"
Channel_Diag(27) = "Error 27"
Channel_Diag(28) = "Error 28"
Channel_Diag(29) = "Error 29"
Channel_Diag(30) = "HART status error"
Channel_Diag(31) = "HART comm. error"
EndModule
;-----------------------------------------------------------------------------

Module = "AOH40Ex " 0x81,0x43,0x1B
27
Info_Text = "Analog output, 1 x 4 ch., 0/4..20  HART"
Ext_Module_Prm_Data_Len = 5
Ext_User_Prm_Data_Ref(0) = 55
Ext_User_Prm_Data_Ref(0) = 63
Ext_User_Prm_Data_Ref(0) = 75
Ext_User_Prm_Data_Ref(0) = 119

Ext_User_Prm_Data_Ref(1) = 56
Ext_User_Prm_Data_Ref(1) = 64
Ext_User_Prm_Data_Ref(1) = 76
Ext_User_Prm_Data_Ref(1) = 120

Ext_User_Prm_Data_Ref(2) = 57
Ext_User_Prm_Data_Ref(2) = 65
Ext_User_Prm_Data_Ref(2) = 77
Ext_User_Prm_Data_Ref(2) = 121

Ext_User_Prm_Data_Ref(3) = 58
Ext_User_Prm_Data_Ref(3) = 66
Ext_User_Prm_Data_Ref(3) = 78
Ext_User_Prm_Data_Ref(3) = 122

Ext_User_Prm_Data_Const(4) = 0x00


Channel_Diag(16) = "Line error"
Channel_Diag(17) = "Forcing active"
Channel_Diag(18) = "Internal address conflict"
Channel_Diag(19) = "Unknown module configured"
Channel_Diag(20) = "Unknown module found"
Channel_Diag(21) = "Error 21"
Channel_Diag(22) = "Parameter inconsistent"
Channel_Diag(23) = "Error 23"
Channel_Diag(24) = "Error 24"
Channel_Diag(25) = "Error 25"
Channel_Diag(26) = "Error 26"
Channel_Diag(27) = "Error 27"
Channel_Diag(28) = "Error 28"
Channel_Diag(29) = "Error 29"
Channel_Diag(30) = "HART status error"
Channel_Diag(31) = "HART comm. error"
EndModule
;-----------------------------------------------------------------------------

Module = "AOH40Ex 1H " 0xC1,0x43,0x41,0x1C
28
Info_Text = "Analog output, 1 x 4 ch., 0/4..20  1 cyclic HART variable"
Ext_Module_Prm_Data_Len = 5
Ext_User_Prm_Data_Ref(0) = 55
Ext_User_Prm_Data_Ref(0) = 63
Ext_User_Prm_Data_Ref(0) = 75
Ext_User_Prm_Data_Ref(0) = 119

Ext_User_Prm_Data_Ref(1) = 56
Ext_User_Prm_Data_Ref(1) = 64
Ext_User_Prm_Data_Ref(1) = 76
Ext_User_Prm_Data_Ref(1) = 120

Ext_User_Prm_Data_Ref(2) = 57
Ext_User_Prm_Data_Ref(2) = 65
Ext_User_Prm_Data_Ref(2) = 77
Ext_User_Prm_Data_Ref(2) = 121

Ext_User_Prm_Data_Ref(3) = 58
Ext_User_Prm_Data_Ref(3) = 66
Ext_User_Prm_Data_Ref(3) = 78
Ext_User_Prm_Data_Ref(3) = 122

Ext_User_Prm_Data_Ref(4) = 123
Ext_User_Prm_Data_Ref(4) = 124


Channel_Diag(16) = "Line error"
Channel_Diag(17) = "Forcing active"
Channel_Diag(18) = "Internal address conflict"
Channel_Diag(19) = "Unknown module configured"
Channel_Diag(20) = "Unknown module found"
Channel_Diag(21) = "Error 21"
Channel_Diag(22) = "Parameter inconsistent"
Channel_Diag(23) = "Error 23"
Channel_Diag(24) = "Error 24"
Channel_Diag(25) = "Error 25"
Channel_Diag(26) = "Error 26"
Channel_Diag(27) = "Error 27"
Channel_Diag(28) = "Error 28"
Channel_Diag(29) = "Error 29"
Channel_Diag(30) = "HART status error"
Channel_Diag(31) = "HART comm. error"
EndModule
;-----------------------------------------------------------------------------

Module = "AOH40Ex 4H " 0xC1,0x43,0x47,0x1D
29
Info_Text = "Analog output, 1 x 4 ch., 0/4..20  4 cyclic HART variables"
Ext_Module_Prm_Data_Len = 5
Ext_User_Prm_Data_Ref(0) = 55
Ext_User_Prm_Data_Ref(0) = 63
Ext_User_Prm_Data_Ref(0) = 75
Ext_User_Prm_Data_Ref(0) = 141
Ext_User_Prm_Data_Ref(4) = 128
Ext_User_Prm_Data_Ref(4) = 127
Ext_User_Prm_Data_Ref(0) = 126
Ext_User_Prm_Data_Ref(0) = 125

Ext_User_Prm_Data_Ref(1) = 56
Ext_User_Prm_Data_Ref(1) = 64
Ext_User_Prm_Data_Ref(1) = 76
Ext_User_Prm_Data_Ref(1) = 142
Ext_User_Prm_Data_Ref(4) = 132
Ext_User_Prm_Data_Ref(4) = 131
Ext_User_Prm_Data_Ref(1) = 130
Ext_User_Prm_Data_Ref(1) = 129

Ext_User_Prm_Data_Ref(2) = 57
Ext_User_Prm_Data_Ref(2) = 65
Ext_User_Prm_Data_Ref(2) = 77
Ext_User_Prm_Data_Ref(2) = 143
Ext_User_Prm_Data_Ref(4) = 136
Ext_User_Prm_Data_Ref(4) = 135
Ext_User_Prm_Data_Ref(2) = 134
Ext_User_Prm_Data_Ref(2) = 133

Ext_User_Prm_Data_Ref(3) = 58
Ext_User_Prm_Data_Ref(3) = 66
Ext_User_Prm_Data_Ref(3) = 78
Ext_User_Prm_Data_Ref(3) = 144
Ext_User_Prm_Data_Ref(4) = 140
Ext_User_Prm_Data_Ref(4) = 139
Ext_User_Prm_Data_Ref(3) = 138
Ext_User_Prm_Data_Ref(3) = 137


Channel_Diag(16) = "Line error"
Channel_Diag(17) = "Forcing active"
Channel_Diag(18) = "Internal address conflict"
Channel_Diag(19) = "Unknown module configured"
Channel_Diag(20) = "Unknown module found"
Channel_Diag(21) = "Error 21"
Channel_Diag(22) = "Parameter inconsistent"
Channel_Diag(23) = "Error 23"
Channel_Diag(24) = "Error 24"
Channel_Diag(25) = "Error 25"
Channel_Diag(26) = "Error 26"
Channel_Diag(27) = "Error 27"
Channel_Diag(28) = "Error 28"
Channel_Diag(29) = "Error 29"
Channel_Diag(30) = "HART status error"
Channel_Diag(31) = "HART comm. error"
EndModule
;-----------------------------------------------------------------------------

Module = "AOH40Ex 8H " 0xC1,0x43,0x4F,0x1E
30
Info_Text = "Analog output, 1 x 4 ch., 0/4..20  8 cyclic HART variables"
Ext_Module_Prm_Data_Len = 5
Ext_User_Prm_Data_Ref(0) = 55
Ext_User_Prm_Data_Ref(0) = 63
Ext_User_Prm_Data_Ref(0) = 75
Ext_User_Prm_Data_Ref(4) = 128
Ext_User_Prm_Data_Ref(4) = 127
Ext_User_Prm_Data_Ref(0) = 126
Ext_User_Prm_Data_Ref(0) = 125

Ext_User_Prm_Data_Ref(1) = 56
Ext_User_Prm_Data_Ref(1) = 64
Ext_User_Prm_Data_Ref(1) = 76
Ext_User_Prm_Data_Ref(4) = 132
Ext_User_Prm_Data_Ref(4) = 131
Ext_User_Prm_Data_Ref(1) = 130
Ext_User_Prm_Data_Ref(1) = 129

Ext_User_Prm_Data_Ref(2) = 57
Ext_User_Prm_Data_Ref(2) = 65
Ext_User_Prm_Data_Ref(2) = 77
Ext_User_Prm_Data_Ref(4) = 136
Ext_User_Prm_Data_Ref(4) = 135
Ext_User_Prm_Data_Ref(2) = 134
Ext_User_Prm_Data_Ref(2) = 133

Ext_User_Prm_Data_Ref(3) = 58
Ext_User_Prm_Data_Ref(3) = 66
Ext_User_Prm_Data_Ref(3) = 78
Ext_User_Prm_Data_Ref(4) = 140
Ext_User_Prm_Data_Ref(4) = 139
Ext_User_Prm_Data_Ref(3) = 138
Ext_User_Prm_Data_Ref(3) = 137


Channel_Diag(16) = "Line error"
Channel_Diag(17) = "Forcing active"
Channel_Diag(18) = "Internal address conflict"
Channel_Diag(19) = "Unknown module configured"
Channel_Diag(20) = "Unknown module found"
Channel_Diag(21) = "Error 21"
Channel_Diag(22) = "Parameter inconsistent"
Channel_Diag(23) = "Error 23"
Channel_Diag(24) = "Error 24"
Channel_Diag(25) = "Error 25"
Channel_Diag(26) = "Error 26"
Channel_Diag(27) = "Error 27"
Channel_Diag(28) = "Error 28"
Channel_Diag(29) = "Error 29"
Channel_Diag(30) = "HART status error"
Channel_Diag(31) = "HART comm. error"
EndModule
;-----------------------------------------------------------------------------

Module = "AI42Ex " 0x41,0x43,0x23
35
Info_Text = "Analog input, 1 x 4 ch., 0/4..20mA, active"
Ext_Module_Prm_Data_Len = 5
Ext_User_Prm_Data_Ref(0) = 55
Ext_User_Prm_Data_Ref(0) = 63
Ext_User_Prm_Data_Ref(0) = 75
Ext_User_Prm_Data_Ref(0) = 111
Ext_User_Prm_Data_Ref(0) = 103

Ext_User_Prm_Data_Ref(1) = 56
Ext_User_Prm_Data_Ref(1) = 64
Ext_User_Prm_Data_Ref(1) = 76
Ext_User_Prm_Data_Ref(1) = 112
Ext_User_Prm_Data_Ref(1) = 104

Ext_User_Prm_Data_Ref(2) = 57
Ext_User_Prm_Data_Ref(2) = 65
Ext_User_Prm_Data_Ref(2) = 77
Ext_User_Prm_Data_Ref(2) = 113
Ext_User_Prm_Data_Ref(2) = 105

Ext_User_Prm_Data_Ref(3) = 58
Ext_User_Prm_Data_Ref(3) = 66
Ext_User_Prm_Data_Ref(3) = 78
Ext_User_Prm_Data_Ref(3) = 114
Ext_User_Prm_Data_Ref(3) = 106

Ext_User_Prm_Data_Const(4) = 0x00


Channel_Diag(16) = "Line error"
Channel_Diag(17) = "Forcing active"
Channel_Diag(18) = "Internal address conflict"
Channel_Diag(19) = "Unknown module configured"
Channel_Diag(20) = "Unknown module found"
Channel_Diag(21) = "Error 21"
Channel_Diag(22) = "Parameter inconsistent"
Channel_Diag(23) = "Error 23"
Channel_Diag(24) = "Error 24"
Channel_Diag(25) = "Error 25"
Channel_Diag(26) = "Error 26"
Channel_Diag(27) = "Error 27"
Channel_Diag(28) = "Error 28"
Channel_Diag(29) = "Error 29"
Channel_Diag(30) = "HART status error"
Channel_Diag(31) = "HART comm. error"
EndModule
;-----------------------------------------------------------------------------

Module = "AI40Ex " 0x41,0x43,0x24
36
Info_Text = "Analog input, 4 x 1 ch., 0/4..20mA, active/passive"
Ext_Module_Prm_Data_Len = 5
Ext_User_Prm_Data_Ref(0) = 55
Ext_User_Prm_Data_Ref(0) = 63
Ext_User_Prm_Data_Ref(0) = 75
Ext_User_Prm_Data_Ref(0) = 111
Ext_User_Prm_Data_Ref(0) = 103

Ext_User_Prm_Data_Ref(1) = 56
Ext_User_Prm_Data_Ref(1) = 64
Ext_User_Prm_Data_Ref(1) = 76
Ext_User_Prm_Data_Ref(1) = 112
Ext_User_Prm_Data_Ref(1) = 104

Ext_User_Prm_Data_Ref(2) = 57
Ext_User_Prm_Data_Ref(2) = 65
Ext_User_Prm_Data_Ref(2) = 77
Ext_User_Prm_Data_Ref(2) = 113
Ext_User_Prm_Data_Ref(2) = 105

Ext_User_Prm_Data_Ref(3) = 58
Ext_User_Prm_Data_Ref(3) = 66
Ext_User_Prm_Data_Ref(3) = 78
Ext_User_Prm_Data_Ref(3) = 114
Ext_User_Prm_Data_Ref(3) = 106

Ext_User_Prm_Data_Const(4) = 0x00


Channel_Diag(16) = "Line error"
Channel_Diag(17) = "Forcing active"
Channel_Diag(18) = "Internal address conflict"
Channel_Diag(19) = "Unknown module configured"
Channel_Diag(20) = "Unknown module found"
Channel_Diag(21) = "Error 21"
Channel_Diag(22) = "Parameter inconsistent"
Channel_Diag(23) = "Error 23"
Channel_Diag(24) = "Error 24"
Channel_Diag(25) = "Error 25"
Channel_Diag(26) = "Error 26"
Channel_Diag(27) = "Error 27"
Channel_Diag(28) = "Error 28"
Channel_Diag(29) = "Error 29"
Channel_Diag(30) = "HART status error"
Channel_Diag(31) = "HART comm. error"
EndModule
;-----------------------------------------------------------------------------

Module = "AI41Ex" 0x41,0x43,0x25
37
Info_Text = "Analog input, 4 x 1 ch., 0/2..10V"
Ext_Module_Prm_Data_Len = 5
Ext_User_Prm_Data_Ref(0) = 55
Ext_User_Prm_Data_Ref(0) = 63
Ext_User_Prm_Data_Ref(0) = 75
Ext_User_Prm_Data_Ref(0) = 115
Ext_User_Prm_Data_Ref(0) = 103

Ext_User_Prm_Data_Ref(1) = 56
Ext_User_Prm_Data_Ref(1) = 64
Ext_User_Prm_Data_Ref(1) = 76
Ext_User_Prm_Data_Ref(1) = 116
Ext_User_Prm_Data_Ref(1) = 104

Ext_User_Prm_Data_Ref(2) = 57
Ext_User_Prm_Data_Ref(2) = 65
Ext_User_Prm_Data_Ref(2) = 77
Ext_User_Prm_Data_Ref(2) = 117
Ext_User_Prm_Data_Ref(2) = 105

Ext_User_Prm_Data_Ref(3) = 58
Ext_User_Prm_Data_Ref(3) = 66
Ext_User_Prm_Data_Ref(3) = 78
Ext_User_Prm_Data_Ref(3) = 118
Ext_User_Prm_Data_Ref(3) = 106

Ext_User_Prm_Data_Const(4) = 0x00


Channel_Diag(16) = "Line error"
Channel_Diag(17) = "Forcing active"
Channel_Diag(18) = "Internal address conflict"
Channel_Diag(19) = "Unknown module configured"
Channel_Diag(20) = "Unknown module found"
Channel_Diag(21) = "Error 21"
Channel_Diag(22) = "Parameter inconsistent"
Channel_Diag(23) = "Error 23"
Channel_Diag(24) = "Error 24"
Channel_Diag(25) = "Error 25"
Channel_Diag(26) = "Error 26"
Channel_Diag(27) = "Error 27"
Channel_Diag(28) = "Error 28"
Channel_Diag(29) = "Error 29"
Channel_Diag(30) = "HART status error"
Channel_Diag(31) = "HART comm. error"
EndModule
;-----------------------------------------------------------------------------

Module = "AO41Ex " 0x81,0x43,0x26
38
Info_Text = "Analog output, 1 x 4 ch., 0/4..20mA"
Ext_Module_Prm_Data_Len = 5
Ext_User_Prm_Data_Ref(0) = 55
Ext_User_Prm_Data_Ref(0) = 63
Ext_User_Prm_Data_Ref(0) = 75
Ext_User_Prm_Data_Ref(0) = 111

Ext_User_Prm_Data_Ref(1) = 56
Ext_User_Prm_Data_Ref(1) = 64
Ext_User_Prm_Data_Ref(1) = 76
Ext_User_Prm_Data_Ref(1) = 112

Ext_User_Prm_Data_Ref(2) = 57
Ext_User_Prm_Data_Ref(2) = 65
Ext_User_Prm_Data_Ref(2) = 77
Ext_User_Prm_Data_Ref(2) = 113

Ext_User_Prm_Data_Ref(3) = 58
Ext_User_Prm_Data_Ref(3) = 66
Ext_User_Prm_Data_Ref(3) = 78
Ext_User_Prm_Data_Ref(3) = 114

Ext_User_Prm_Data_Const(4) = 0x00


Channel_Diag(16) = "Line error"
Channel_Diag(17) = "Forcing active"
Channel_Diag(18) = "Internal address conflict"
Channel_Diag(19) = "Unknown module configured"
Channel_Diag(20) = "Unknown module found"
Channel_Diag(21) = "Error 21"
Channel_Diag(22) = "Parameter inconsistent"
Channel_Diag(23) = "Error 23"
Channel_Diag(24) = "Error 24"
Channel_Diag(25) = "Error 25"
Channel_Diag(26) = "Error 26"
Channel_Diag(27) = "Error 27"
Channel_Diag(28) = "Error 28"
Channel_Diag(29) = "Error 29"
Channel_Diag(30) = "HART status error"
Channel_Diag(31) = "HART comm. error"
EndModule
;-----------------------------------------------------------------------------

Module = "AO40Ex " 0x81,0x43,0x27
39
Info_Text = "Analog output, 4 x 1 ch., 0/4..20mA"
Ext_Module_Prm_Data_Len = 5
Ext_User_Prm_Data_Ref(0) = 55
Ext_User_Prm_Data_Ref(0) = 63
Ext_User_Prm_Data_Ref(0) = 75
Ext_User_Prm_Data_Ref(0) = 111

Ext_User_Prm_Data_Ref(1) = 56
Ext_User_Prm_Data_Ref(1) = 64
Ext_User_Prm_Data_Ref(1) = 76
Ext_User_Prm_Data_Ref(1) = 112

Ext_User_Prm_Data_Ref(2) = 57
Ext_User_Prm_Data_Ref(2) = 65
Ext_User_Prm_Data_Ref(2) = 77
Ext_User_Prm_Data_Ref(2) = 113

Ext_User_Prm_Data_Ref(3) = 58
Ext_User_Prm_Data_Ref(3) = 66
Ext_User_Prm_Data_Ref(3) = 78
Ext_User_Prm_Data_Ref(3) = 114

Ext_User_Prm_Data_Const(4) = 0x00


Channel_Diag(16) = "Line error"
Channel_Diag(17) = "Forcing active"
Channel_Diag(18) = "Internal address conflict"
Channel_Diag(19) = "Unknown module configured"
Channel_Diag(20) = "Unknown module found"
Channel_Diag(21) = "Error 21"
Channel_Diag(22) = "Parameter inconsistent"
Channel_Diag(23) = "Error 23"
Channel_Diag(24) = "Error 24"
Channel_Diag(25) = "Error 25"
Channel_Diag(26) = "Error 26"
Channel_Diag(27) = "Error 27"
Channel_Diag(28) = "Error 28"
Channel_Diag(29) = "Error 29"
Channel_Diag(30) = "HART status error"
Channel_Diag(31) = "HART comm. error"
EndModule
;-----------------------------------------------------------------------------

Module = "TI40Ex R " 0x41,0x43,0x28
40
Info_Text = "Temperature Input, 4 x 1 ch., Resistor (2,3,4 wire)"
Ext_Module_Prm_Data_Len = 5
Ext_User_Prm_Data_Ref(4) = 162
Ext_User_Prm_Data_Ref(4) = 161
Ext_User_Prm_Data_Ref(4) = 107

Ext_User_Prm_Data_Ref(0) = 55
Ext_User_Prm_Data_Ref(0) = 63
Ext_User_Prm_Data_Ref(0) = 223
Ext_User_Prm_Data_Ref(0) = 149

Ext_User_Prm_Data_Ref(1) = 56
Ext_User_Prm_Data_Ref(1) = 64
Ext_User_Prm_Data_Ref(1) = 224
Ext_User_Prm_Data_Ref(1) = 150

Ext_User_Prm_Data_Ref(2) = 57
Ext_User_Prm_Data_Ref(2) = 65
Ext_User_Prm_Data_Ref(2) = 225
Ext_User_Prm_Data_Ref(2) = 151

Ext_User_Prm_Data_Ref(3) = 58
Ext_User_Prm_Data_Ref(3) = 66
Ext_User_Prm_Data_Ref(3) = 226
Ext_User_Prm_Data_Ref(3) = 152


Channel_Diag(16) = "Line error"
Channel_Diag(17) = "Forcing active"
Channel_Diag(18) = "Internal address conflict"
Channel_Diag(19) = "Unknown module configured"
Channel_Diag(20) = "Unknown module found"
Channel_Diag(21) = "Error 21"
Channel_Diag(22) = "Parameter inconsistent"
Channel_Diag(23) = "Error 23"
Channel_Diag(24) = "Error 24"
Channel_Diag(25) = "Error 25"
Channel_Diag(26) = "Error 26"
Channel_Diag(27) = "Error 27"
Channel_Diag(28) = "Error 28"
Channel_Diag(29) = "Error 29"
Channel_Diag(30) = "HART status error"
Channel_Diag(31) = "HART comm. error"
EndModule
;-----------------------------------------------------------------------------

Module = "TI40Ex T " 0x41,0x43,0x29
41
Info_Text = "Temperature Input, 4 x 1 ch., Thermocouple"
Ext_Module_Prm_Data_Len = 5
Ext_User_Prm_Data_Ref(4) = 163
Ext_User_Prm_Data_Ref(4) = 164
Ext_User_Prm_Data_Ref(4) = 107

Ext_User_Prm_Data_Ref(0) = 63
Ext_User_Prm_Data_Ref(0) = 223
Ext_User_Prm_Data_Ref(0) = 157

Ext_User_Prm_Data_Ref(1) = 64
Ext_User_Prm_Data_Ref(1) = 224
Ext_User_Prm_Data_Ref(1) = 158

Ext_User_Prm_Data_Ref(2) = 65
Ext_User_Prm_Data_Ref(2) = 225
Ext_User_Prm_Data_Ref(2) = 159

Ext_User_Prm_Data_Ref(3) = 66
Ext_User_Prm_Data_Ref(3) = 226
Ext_User_Prm_Data_Ref(3) = 160


Channel_Diag(16) = "Line error"
Channel_Diag(17) = "Forcing active"
Channel_Diag(18) = "Internal address conflict"
Channel_Diag(19) = "Unknown module configured"
Channel_Diag(20) = "Unknown module found"
Channel_Diag(21) = "Error 21"
Channel_Diag(22) = "Parameter inconsistent"
Channel_Diag(23) = "Error 23"
Channel_Diag(24) = "Error 24"
Channel_Diag(25) = "Error 25"
Channel_Diag(26) = "Error 26"
Channel_Diag(27) = "Error 27"
Channel_Diag(28) = "Error 28"
Channel_Diag(29) = "Error 29"
Channel_Diag(30) = "HART status error"
Channel_Diag(31) = "HART comm. error"
EndModule
;-----------------------------------------------------------------------------


;=============================================================================
; Slot Definition
;=============================================================================
;SlotDefinition
;Slot(0) = "Slot 0" 1 1-2
;Slot(1) = "Slot 1" 0 0,3-22
;Slot(2) = "Slot 2" 0 0,3-22
;Slot(3) = "Slot 3" 0 0,3-22
;Slot(4) = "Slot 4" 0 0,3-22
;Slot(5) = "Slot 5" 0 0,3-22
;Slot(6) = "Slot 6" 0 0,3-22
;Slot(7) = "Slot 7" 0 0,3-22
;Slot(8) = "Slot 8" 0 0,3-22
;Slot(9) = "Slot 9" 0 0,3-22
;Slot(10) = "Slot 10" 0 0,3-22
;Slot(11) = "Slot 11" 0 0,3-22
;Slot(12) = "Slot 12" 0 0,3-22
;Slot(13) = "Slot 13" 0 0,3-22
;Slot(14) = "Slot 14" 0 0,3-22
;Slot(15) = "Slot 15" 0 0,3-22
;Slot(16) = "Slot 16" 0 0,3-22
;EndSlotDefinition


;=============================================================================
; END of File
;=============================================================================