;*******************************************************************************
; Device Data Base File for A(1S)J71PB92D 
; Version 1.0 delivered with ProfiMap 1.0.0x
;********************************************************************************
; Changes:	new version 1.1 to support new firmware release with 244 Byte I/O
;			delivered with ProfiMap 1.10
;********************************************************************************

#Profibus_DP

GSD_Revision	   = 1		;added for version 1.10

Vendor_Name        = "MITSUBISHI ELECTRIC CORPORATION"
Model_Name         = "A(1S)J71PB92D"	;can be big or small module
Revision           = "BE"	;has to be updated 
Ident_Number       = 0xF036	;still valid for new revision
Protocol_Ident     = 0		;PROFIBUS-DP
Station_Type       = 1		;Master Station (DP master class 1)
FMS_supp           = 0		;DP Master only
Hardware_Release   = "B"	;can be newer
Software_Release   = "E"	;can be newer

;all Bd-Rates are supported
9.6_supp           = 1
19.2_supp          = 1
93.75_supp         = 1
187.5_supp         = 1
500_supp           = 1
1.5M_supp          = 1
3M_supp            = 1
6M_supp            = 1
12M_supp           = 1

;timer values for each Bd-Rate in bit-times,
;this is the max. response time to answer a request telegram
MaxTsdr_9.6        = 60
MaxTsdr_19.2       = 60
MaxTsdr_93.75      = 60
MaxTsdr_187.5      = 60
MaxTsdr_500        = 100
MaxTsdr_1.5M       = 150
MaxTsdr_3M         = 250
MaxTsdr_6M         = 450
MaxTsdr_12M        = 800

;layer 1 specifications
Redundancy         = 0	;this device uses no redundant transmission
Repeater_Ctrl_Sig  = 0	;CNTR-P is not used (1: RS485, 2:TTL)
24V_Pins           = 0	;M24V/P24V are not used

Implementation_Type = "ASPC2 / ST D"	;Siemens ASIC used
Bitmap_Device		= "J71PB92D"		;J71PB92D.DIB

Download_supp      = 0	;DownLoad, Start_Seq, End_Seq not supported
Upload_supp        = 0	;UpLoad,  Start_Seq, End_Seq not supported
Act_Para_Brct_supp = 0	;Act_Para_Brct not supported
Act_Param_supp     = 0	;Act_Param not supported

Max_MPS_Length     = 32736	;32K EEPROM
Max_Lsdu_MS        = 244	;max. L_sdu size for Master Slave comm.
Max_Lsdu_MM        = 244	;max. L_sdu size for Master Master comm.
Min_Poll_Timeout   = 50		;x 10ms, max. time to respond a master master cycle

;times (in bit-times) that are needed to be ready after request telegram
Trdy_9.6           = 1
Trdy_19.2          = 1
Trdy_93.75         = 1
Trdy_187.5         = 1
Trdy_500           = 1
Trdy_1.5M          = 1
Trdy_3M            = 1
Trdy_6M            = 1
Trdy_12M           = 1

;modulator delay times (in bit-times)
Tqui_9.6           = 0
Tqui_19.2          = 0
Tqui_93.75         = 0
Tqui_187.5         = 0
Tqui_500           = 0
Tqui_1.5M          = 0
Tqui_3M            = 3
Tqui_6M            = 6
Tqui_12M           = 9

;event trigger delay times layer 2 (bit-times)
Tset_9.6           = 1
Tset_19.2          = 1
Tset_93.75         = 1
Tset_187.5         = 1
Tset_500           = 1
Tset_1.5M          = 1
Tset_3M            = 4
Tset_6M            = 8
Tset_12M           = 16

LAS_Len            = 127	;max. live list size

;station delay times (bit-times)
Tsdi_9.6           = 10
Tsdi_19.2          = 15
Tsdi_93.75         = 15
Tsdi_187.5         = 80
Tsdi_500           = 80
Tsdi_1.5M          = 150
Tsdi_3M            = 150
Tsdi_6M            = 150
Tsdi_12M           = 150

Max_Slaves_supp    = 60		;changed from 126

;change the following entries to 32 to support the older firmware 
Max_Master_Input_Len = 244	;max. length of input data per slave supported
Max_Master_Output_Len = 244	;max. length of output data per slave supported
;change the following entry to 64 to support the older firmware 
Max_Master_Data_Len = 488	;sum of input + output