;---------------------------------------------------------------------------
; GSD file for PRetrans 6350
; Company: PR electronics A/S
; Version: 1.00
; Date:    12 Sept 2003
;---------------------------------------------------------------------------

#Profibus_DP

; *** General ***
GSD_Revision				= 3
Vendor_Name					= "PR electronics A/S"
Model_Name					= "PRetrans 6350"
Revision					= "1.0"
Ident_Number				= 0x6350
Protocol_Ident				= 0
Station_Type				= 0
FMS_supp					= 0
Hardware_Release			= "63509002"
Software_Release			= "V2.03 PA01"
9.6_supp					= 0
19.2_supp					= 0
31.25_supp					= 1
45.45_supp					= 1
93.75_supp					= 1
187.5_supp					= 0
500_supp					= 0
1.5M_supp					= 0
3M_supp						= 0
6M_supp						= 0
12M_supp					= 0
MaxTsdr_9.6					= 60
MaxTsdr_19.2				= 60
MaxTsdr_31.25				= 100
MaxTsdr_45.45				= 250
MaxTsdr_93.75				= 1000
MaxTsdr_187.5				= 60
MaxTsdr_500					= 100
MaxTsdr_1.5M				= 150
MaxTsdr_3M					= 250
MaxTsdr_6M					= 450
MaxTsdr_12M					= 800
Redundancy					= 0
Repeater_Ctrl_Sig			= 0
24V_Pins					= 0

; *** Bitmaps ***
Bitmap_Device				= "PR6350N"
Bitmap_Diag					= "PR6350D"
Bitmap_SF					= "PR6350S"

; *** Slave Specification ***
Freeze_Mode_supp			= 0
Sync_Mode_supp				= 0
Auto_Baud_supp				= 0
Set_Slave_Add_Supp			= 1
Min_Slave_Intervall			= 250
Modular_Station				= 1
Max_Module					= 2
Max_Input_Len				= 10
Max_Output_Len				= 0
Max_Data_Len				= 10
Fail_Safe					= 0
Max_Diag_Data_Len			= 14
Slave_Family				= 12

; *** UserPrmData: Length and Preset ***
Max_User_Prm_Data_Len		= 3
Ext_User_Prm_Data_Const(0)	= 0x00,0x00,0x00

; *** Description of extended DP features ***
DPV1_Slave					= 1
C2_Read_Write_supp			= 1
C2_Max_Data_Len				= 128
C2_Read_Write_required		= 1
C2_Max_Count_Channels		= 3
C2_Response_Timeout			= 4000
DPV1_Data_Types				= 1
Max_Initiate_PDU_Length     = 52 

; *** Description of physical interface for async. and sync. transmission ***
Physical_Interface				= 0
	Transmission_Delay_45.45	= 0
	Reaction_Delay_45.45		= 0
	Transmission_Delay_93.75	= 0
	Reaction_Delay_93.75		= 0
End_Physical_Interface

Physical_Interface				= 1
	Transmission_Delay_31.25	= 0
	Reaction_Delay_31.25		= 0
End_Physical_Interface

; *** Description of device related diagnosis ***
Unit_Diag_Bit(16)   = "Error appears"
Unit_Diag_Bit(17)   = "Error disappears"
Unit_Diag_Bit(24)   = "Hardware failure electronics"
Unit_Diag_Bit(25)   = "Hardware failure mechanics"
Unit_Diag_Bit(26)   = "Motor temperature too high"
Unit_Diag_Bit(27)   = "Electronic temperature too high"    
Unit_Diag_Bit(28)   = "Memory error"
Unit_Diag_Bit(29)   = "Measurement failure"
Unit_Diag_Bit(30)   = "Device not initialized"
Unit_Diag_Bit(31)   = "Device initialization failed"
Unit_Diag_Bit(32)   = "Zero point error"
Unit_Diag_Bit(33)   = "Power supply failed"
Unit_Diag_Bit(34)   = "Configuration invalid"
Unit_Diag_Bit(35)   = "Restart"
Unit_Diag_Bit(36)   = "Coldstart"
Unit_Diag_Bit(37)   = "Maintenance required"
Unit_Diag_Bit(38)   = "Characteristics invalid"
Unit_Diag_Bit(39)   = "Ident_Number violation"
Unit_Diag_Bit(55)   = "Extension Available"

; *** Module Definition List for Analog Input ***
Module = "Empty Module" 0x00 
1
EndModule

Module = "Analog Input (AI) short" 0x94
2
EndModule

Module = "Analog Input (AI) long" 0x42,0x84,0x08,0x05
3
EndModule 

; *** Description of the module assignment ***
SlotDefinition
	Slot(1)	= "Analog Input Block 1" 2 1,2,3
	Slot(2)	= "Analog Input Block 2" 2 1,2,3
EndSlotDefinition