;===================================================================
;GSD-Datei for Profibus DP-DT Modul from HMS Fieldbus Systems AB
;
;Stand : 27.01.1997
;File  : HMS_1002.GSD
;===================================================================
#Profibus_DP
; Unit-Defination-List:
GSD_Revision        = 1
Vendor_Name         = "HMS Fieldbus Systems AB"
Model_Name          = "AB-DT-PDP"
Revision            = "Version 1.4"
Ident_Number        = 0x1002
Protocol_Ident      = 0
Station_Type        = 0        ; DP-Slave
FMS_supp            = 0        ; no FMS/DP Mixed Device
Hardware_Release    = "Version 1.0"
Software_Release    = "Version 1.0"
;
9.6_supp =              1                          ;baud rate supported
19.2_supp =             1                          ;baud rate supported
93.75_supp =            1                          ;baud rate supported
187.5_supp =            1                          ;baud rate supported
500_supp =              1                          ;baud rate supported
1.5M_supp =             1                          ;baud rate supported
3M_supp             = 1                            ;baud rate supported
6M_supp             = 1                            ;baud rate supported
12M_supp            = 1                            ;baud rate supported
; Duration to answer a request by a responder
MaxTsdr_9.6 = 60
MaxTsdr_19.2 = 60
MaxTsdr_93.75 = 60
MaxTsdr_187.5 = 60
MaxTsdr_500 = 100
MaxTsdr_1.5M = 150
MaxTsdr_3M = 250
MaxTsdr_6M = 450
MaxTsdr_12M = 800
;
Redundancy          = 0        ; redund. Transceiver not supp.
Repeater_Ctrl_Sig   = 2        ; TTL
24V_Pins            = 0        ; Not connected
;
Implementation_Type = "SPC3"
Bitmap_Device = "DP_NORM"
;
; Slave-Specification:
Freeze_Mode_supp    = 1        ; Freeze-Mode supported
Sync_Mode_supp      = 1        ; Sync-Mode supported
Auto_Baud_supp      = 1        ; auto. Baud. detec. supp.
Set_Slave_Add_supp  = 0        ; Set_Slave_Add not supported
Min_Slave_Intervall = 10
;
Modular_Station     = 1
Max_Module          = 24
Max_Input_Len       = 200
Max_Output_Len      = 200
Max_Data_Len        = 400
Modul_Offset        = 200
;
Fail_Safe           = 0        ; data telegram without data in
;                              ; state CLEAR not accepted
Slave_Family        = 0
Max_Diag_Data_Len   = 16
;
Unit_Diag_Bit(0)    = "OK"
Unit_Diag_Bit(1)    = "ERROR 1"
Unit_Diag_Bit(2)    = "ERROR 2"
Unit_Diag_Bit(3)    = "ERROR 3"
Unit_Diag_Bit(4)    = "ERROR 4"
Unit_Diag_Bit(127)  = "ERROR 127"
;
Module = "INPUT/OUTPUT: 1 Byte" 0x30
EndModule
Module = "INPUT/OUTPUT: 2 Byte " 0x70
EndModule
Module = "INPUT/OUTPUT: 4 Byte " 0x71
EndModule
Module = "INPUT/OUTPUT: 8 Byte" 0x73
EndModule
Module = "INPUT/OUTPUT: 16 Byte" 0x77
EndModule
Module = "INPUT/OUTPUT: 32 Byte" 0x7F
EndModule
Module = "INPUT/OUTPUT: 64 Byte" 0xC0,0x5F,0x5F
EndModule
Module = "INPUT/OUTPUT: 128 Byte" 0xC0,0x7F,0x7F
EndModule
Module = "INPUT: 1 Byte" 0x10
EndModule
Module = "INPUT: 2 Byte" 0x50
EndModule
Module = "INPUT: 4 Byte" 0x51
EndModule
Module = "INPUT: 8 Byte" 0x53
EndModule
Module = "INPUT: 16 Byte" 0x57
EndModule
Module = "INPUT: 32 Byte" 0x5F
EndModule
Module = "INPUT: 64 Byte" 0x40,0x5F
EndModule
Module = "INPUT: 128 Byte" 0x40,0x7F
EndModule
Module = "OUTPUT: 1 Byte" 0x20
EndModule
Module = "OUTPUT: 2 Byte" 0x60
EndModule
Module = "OUTPUT: 4 Byte" 0x61
EndModule
Module = "OUTPUT: 8 Byte" 0x63
EndModule
Module = "OUTPUT: 16 Byte" 0x67
EndModule
Module = "OUTPUT: 32 Byte" 0x6F
EndModule
Module = "OUTPUT: 64 Byte" 0x80,0x5F
EndModule
Module = "OUTPUT 128 Byte" 0x80,0x7F
EndModule