;==========================================================================================
; GSE file for ABB Automation PA-Slave
; Device : TRIOWIRL V_4000/S_4000
; Date   : 28.08.2002
;==========================================================================================

#Profibus_DP
GSD_Revision        = 3
Vendor_Name         = "ABB Automation"
Model_Name          = "TRIOWIRL V_4000/S_4000"
Revision            = "Profil 3.0"
Ident_Number        = 0x05DC
Protocol_Ident      = 0
Station_Type        = 0
FMS_supp            = 0
Hardware_Release    = "Revision 0"
Software_Release    = "D200F003U01 A.15"
Bitmap_Device       = "ABB05DCn"
Bitmap_Diag         = "ABB05DCd"
Bitmap_SF           = "ABB05DCs"
31.25_supp          = 1
45.45_supp          = 1
93.75_supp          = 1
MaxTsdr_31.25       = 100
MaxTsdr_45.45       = 250
MaxTsdr_93.75       = 1000
Redundancy          = 0
Repeater_Ctrl_Sig   = 0
24V_Pins            = 0
Freeze_Mode_supp    = 0
Sync_Mode_supp      = 0
Set_Slave_Add_supp  = 1
Min_Slave_Intervall = 100
Modular_Station     = 1
Max_Module          = 3
Max_Input_Len       = 15
Max_Output_Len      = 2
Max_Data_Len        = 17
Slave_Family        = 12
Max_Diag_Data_Len   = 20
Max_User_Prm_Data_Len = 3
Ext_User_Prm_Data_Const(0) = 0x00, 0x00, 0x00


;-------------------------------------------------------------------------
; Description of extended DP features
;-------------------------------------------------------------------------
DPV1_Slave = 1
C2_Read_Write_supp      = 1
C2_Max_Data_Len         = 220
C2_Read_Write_required  = 1
C2_Max_Count_Channels   = 3
Max_Initiate_PDU_Length = 52
C2_Response_Timeout     = 4000
DPV1_Data_Types         = 0


;-------------------------------------------------------------------------
; Description of physical interface for async. and sync. transmission
;-------------------------------------------------------------------------
Physical_Interface  = 0
Transmission_Delay_45.45 = 0
Reaction_Delay_45.45     = 0
Transmission_Delay_93.75 = 0
Reaction_Delay_93.75     = 0
End_Physical_Interface

Physical_Interface  = 1
Transmission_Delay_31.25 = 0
Reaction_Delay_31.25     = 0
End_Physical_Interface


;-------------------------------------------------------------------------
; Description of device related diagnosis
;-------------------------------------------------------------------------
Unit_Diag_Bit(16)   = "Error appears"
Unit_Diag_Bit(17)   = "Error disappears"
Unit_Diag_Bit(24)   = "Hardware failure electronics"
Unit_Diag_Bit(28)   = "Memory error"
Unit_Diag_Bit(29)   = "Measurement failure"
Unit_Diag_Bit(55)   = "Extension Available"
Unit_Diag_Bit(57)   = "Qv> 115% QmaxDN"
Unit_Diag_Bit(59)   = "Backup DataBase"
Unit_Diag_Bit(64)   = "Steam Calculation"
Unit_Diag_Bit(65)   = "FrontEnd"
Unit_Diag_Bit(67)   = "Q > 115% Qmax"
Unit_Diag_Bit(69)   = "Main DataBase"
Unit_Diag_Bit(70)   = "TB-Totalizer"
Unit_Diag_Bit(71)   = "Temperature"
Unit_Diag_Bit(72)   = "Max.Temperature Alarm"
Unit_Diag_Bit(73)   = "Min.Temperature Alarm"
Unit_Diag_Bit(75)   = "Max.Flow Alarm"
Unit_Diag_Bit(76)   = "Min.Flow Alarm"
Unit_Diag_Bit(84)   = "Selfcheck Pulse Output"
Unit_Diag_Bit(85)   = "Selfcheck Switch.Output"
Unit_Diag_Bit(86)   = "Selfcheck Flow simulation"


;-------------------------------------------------------------------------
;Empty module
Module = "EMPTY_MODULE"                0x00
1
EndModule
;
;Modules for flow meter
Module   = "AI"                        0x94
2
EndModule
;
Module   = "TOTAL"                     0x41,0x84,0x85
3
EndModule
;
Module   = "SETTOT_TOTAL"              0xC1,0x80,0x84,0x85
4
EndModule
;
Module   = "SETTOT_MODETOT_TOTAL"      0xC1,0x81,0x84,0x85
5
EndModule

;----------- Description of the module assignment: ---------------------
;
SlotDefinition
Slot(1) = "AI1"       2 1,2
Slot(2) = "Totalizer" 3 1,3,4,5
Slot(3) = "AI2"       2 1,2
EndSlotDefinition