;=====================================================================
; GSD file for 2600T Pressure Series Transmitter - Mod.262/264 - PROFIBUS-DPV1 
; Company: ABB SACE SpA
; Version: 1.0 
; Date: 20.01.2003
; Author: M.Romagnoli Tel +39 344 58248
;                     Fax +39 344 56152
;                     E-mail mauro.romagnoli@it.abb.com
;
;====================================================================
; GSD File  (Simple compact Slave) 
;            
; Version:  V0.1  
;======================================================
#Profibus_DP
GSD_Revision=2

;General parameters
Vendor_Name     = "ABB"
Model_Name      = "2600T Press. Transm. 262/264"
Revision        = "1.00"
Ident_Number    = 0x052B
Protocol_Ident  = 0
Station_Type    = 0
FMS_supp        = 0
Hardware_Release= "V 1.00"
Software_Release= "V 1.00"

Implementation_Type="SPC42/ITEC"
Bitmap_Device="262_264N"
Bitmap_Diag="262_264D"
Bitmap_SF="262_264S"

9.6_supp 				= 0
19.2_supp				= 0
31.25_supp 			= 1
45.45_supp			= 1				; for Siemens Segment Coupler
93.75_supp			= 1				; for Pepperl & Fuchs Segment Coupler
187.5_supp 			= 0
500_supp				= 0
1.5M_supp				= 0
3M_supp					= 0
6M_supp 				= 0
12M_supp 				= 0

MaxTsdr_31.25   = 100
MaxTsdr_45.45   = 200
MaxTsdr_93.75   = 1000

Redundancy      = 0
Repeater_Ctrl_Sig = 2
24V_Pins        = 0

; Slave-Specification:
Freeze_Mode_supp     = 0
Sync_Mode_supp       = 0
Auto_Baud_supp       = 0
Set_Slave_Add_Supp   = 1
Min_Slave_Intervall  = 100
Fail_Safe            = 1
Max_Diag_Data_Len    = 20
Slave_Family         = 12
Modular_Station      = 1

Max_Module					= 4
Max_Input_Len				= 10
Max_Output_len 			= 0
Max_Data_Len				= 10 

; UserPrmData: Length and Preset:
User_Prm_Data_Len    = 3
User_Prm_Data        = 0x00,0x00,0x00

;----------- Description of device related diagnosis: ---------------------
;
Unit_Diag_Bit(16)   = "Error appears" 
Unit_Diag_Bit(17)   = "Error disappears" 
Unit_Diag_Bit(24)   = "Hardware failure electronics" 
Unit_Diag_Bit(25)   = "Hardware failure mechanics" 
Unit_Diag_Bit(28)   = "Memory error" 
Unit_Diag_Bit(29)   = "Measurement failure" 
Unit_Diag_Bit(34)   = "Configuration invalid" 
Unit_Diag_Bit(35)   = "Restart" 
Unit_Diag_Bit(36)   = "Coldstart" 
Unit_Diag_Bit(37)   = "Maintenance required" 
Unit_Diag_Bit(39)   = "Ident_Number violation" 
Unit_Diag_Bit(55)   = "Extension Available"  

;-- diagnosisExtension[0] 
Unit_Diag_Bit(56)	 = "Sensor incompatible" 
Unit_Diag_Bit(57)   = "Sensor data-base incompatible" 
Unit_Diag_Bit(58)   = "Memory CRC critical error" 
Unit_Diag_Bit(59)   = "Memory CRC not-critical error" 
Unit_Diag_Bit(60)   = "Read Only Memory failed" 
Unit_Diag_Bit(61)   = "Sensor EEPROM burn failed" 
Unit_Diag_Bit(62)   = "Electronic EEPROM burn failed" 
 
;-- diagnosisExtension[1] 
Unit_Diag_Bit(64)	 = "Pressure Sens.Out of High limit" 
Unit_Diag_Bit(65)   = "Pressure Sensor Out of Low limit" 
Unit_Diag_Bit(66)   = "Overrange High side" 
Unit_Diag_Bit(67)   = "Overrange low side" 
Unit_Diag_Bit(68)	 = "Sensor Temp.Out of High limit" 
Unit_Diag_Bit(69)   = "Sensor Temp.Out of Low limit" 
Unit_Diag_Bit(70)	 = "Static Pressure Out of limit"  

;-- diagnosisExtension[2] 
Unit_Diag_Bit(72)   = "Static Pressure sensor failed" 
Unit_Diag_Bit(73)   = "Sensor Temperature sensor failed" 
Unit_Diag_Bit(74)   = "Simulation Active"  
;-------------------------------------------------------------------------


; Module Definition List
Module="PV status (short)" 0x94
EndModule
Module="PV status" 0x42,0x84,0x08,0x05
EndModule
Module="PV & Auxiliary (short)" 0x94,0x94
EndModule
Module="PV & Auxiliary" 0x42,0x84,0x08,0x05,0x42,0x84,0x08,0x05
EndModule